Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,212

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    There were two versions of the quad box, a 722 and a 7220, the 722 is a direct in 5th gear which you can split, the 7220 is a overdrive in 5th gear which you do not split, you go from 4th high to 5th high gear. hope that helps!! terry
  2. terry
    I believe same as a B67. terry
  3. terry
    You will not be happy with the top end, unless you want the speed of a turtle! terry
  4. terry
    listing a price will answer a lot of questions. terry
  5. terry
    if that is the six speed with the extra low, deep reduction, it very will maybe not work to good behind that engine that had a fuller, that mack trans. has some real wide gear splits that might lug that engine pretty bad. terry
  6. terry
    bet that is a tire smoker!! terry
  7. terry
    very nice R, but the b does a lot more for me!! terry
  8. terry
    I don't know what you mean by right fuel curve, but a stock 237 in front of a triplex or quad will be fine, I drove one that way for years, and it was a working truck, out everyday. terry
  9. terry
    Excellent pics!!👍
  10. terry
    Sometimes you have to improvise!. terry
  11. terry
    there are different variations of electronics, from just a electronic throttle to injectors and pump. terry
  12. terry
    good pics!! terry👍
  13. terry
    Could it be a Hendrickson? terry
  14. terry
    weren't there 57 chevys with a factory fuel injection? and early corvettes.
  15. terry
    was 58 the first year of the 348 engine? terry
  16. terry
    A real classic for sure!! terry👍
  17. terry
    Any type of restoration is better than going to china!! terry
  18. terry
    mack transmission takes gear oil, a fuller takes 50 w. synthetic. terry
  19. terry
    👍👍
  20. terry
    Know of anybody with a lathe to turn down from a bigger pin? terry
  21. terry
    can't say much for the white walls!! but everybody to there own things! terry
  22. terry
    nice!!!👍
  23. terry
    good to know, didn't realize that. terry
  24. terry
    no milling unless flywheel housing was run real loose for a long time, can do it with engine in the frame, maybe there is something you are not understanding? like I said remove flywheel housing, remove dowel pins, install flywheel housing and dial indicate to find center, and tighten bolts, ream dowel pin holes to a size you can get oversized dowel pin for and pound them in. terry
  25. terry
    The proper way to center flywheel housing, is remove dowel pins, center housing and ream dowel holes, and drive oversize pins in. terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...