Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,495

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    Real simple to do, surprised they still have kits for it.👍 terry
  2. terry
    The truck that I drove was a dump, not a good combo for a tractor, Pretty underpowered, does your 350 pull up to that 60MPH pretty good? As for as them temperatures the worse thing I have found is being plugged between intercooler and radiator. taking intercooler clear out and steaming will help alot That E7 350 is a good engine. On that 676 engine, years ago I put a dump together with that engine and a 12 spd. overdrive with 4.17 rears and the pump turned up to 2300 RPM's it would surprise a lot of people. terry
  3. terry
    It's hard to see but that looks like a 67 series trans. terry
  4. terry
    There was a E7 maxidyne up to about mid 90's they used the 6,7and 8spd with that real wide overdrive, and used about a 5.50 or so rear ratio. terry I drove one for about 4 years
  5. terry
    I liked that double coin RLB 450 for a dump truck, the only downside it hold a million little rocks to be kicked out! terry
  6. terry
    Only thing you can not bridge any weight. terry plus easy to put to much weight on steer axle.
  7. terry
    As rob said be sure to carefully check out the trunnion bushing, might be looser than you think. terry
  8. terry
    I run one of them cable backhoes in Army AIT training FT. leonardwood Mo. in 1967, quite the learning curve!! terry
  9. terry
    love that P/U haven't seen one of those for a long long time!! that one might be a little newer that I was thing of, what year? seems we had some of those in Viet Nam. terry👍👍 good luck on the blaster!!
  10. terry
    so can you get prices and post on here? Then if somebody is interested they can call him, without bothering him if they are out of there price range? terry
  11. terry
    👍👍👍
  12. terry
    very nice set up!! 👍👍 terry
  13. terry
    nice to look at all rust free iron!! terry👍
  14. terry
    👍👍👍
  15. terry
    To bad a guy can't snag one of them to use! terry
  16. terry
    Power divider is probably junk! terry
  17. terry
    very very nice.👍👍👍 terry
  18. terry
    If he doesn't even know what a power divider is, he sure isn't going to know what to look for on a mack to figure out what he has. people sometimes get confused on the automatic power divider on a mack. terry
  19. terry
    These are not manuals that cover everything , one is a engine overhaul for E6/672 2 valve, such as a 237/285 series. The other is overhaul for the mack 12 spd transmission, TRTXL 107 and 1070 series. 30 dollars each or both for 50 shipped. terry
  20. terry
    you would think with all the nice pics he posted, would keep an eye on here to answer questions. and prices
  21. terry
    If it does't have a air operated power divider, it has a inter-axle one that you can't see on the outside, to detailed to explain here, another good reason for a manual. terry
  22. terry
    If you are talking cracked at the frame flange bend, top or bottom it is generally rust spreading a double frame, or even on a single frame at the trunnion stand at the bottom. terry
  23. terry
    You have a dump truck and don't know what a power divider is? Are you brand new to this line of work? terry you better get you an older mack manual.
  24. terry
    👍👍👍
  25. terry
    Are they the same ratio? terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...