Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,209

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    One under each rocker shaft, feeds oil on the topside. terry
  2. terry
    Even the truck tires were half flat from the weight! terry
  3. terry
    I would say you found the problem, replace the injector or try another rebuilder. terry
  4. terry
    Outstanding job, you done good !! terry
  5. terry
    Must be talking about norm, really a terrific guy! terry
  6. terry
    Could be a combination of worn spoke, or clamps, the old school remedy was a small spacer that went with the original wheel spacer, think i still have a couple hanging in my garage. terry
  7. terry
    just a note to say I really like following this adventure! terry
  8. terry

    Likes ?

    terry posted a topic in Odds and Ends

    I know there have been some changes on the site, just noticed the like button missing, kind of liked it ! guess i better open my eyes! terry
  9. terry
    Alot depends on working conditions, real clean, or real dirty conditions, goes for all the maintenance items, oil change, air filters and greasing. terry
  10. terry

    Mack ???

    terry replied to Hobert62's topic in Trucks for Sale

    Probably put together from different brands! terry
  11. terry
    I ran a rough terrain crane in Viet Nam, had the 903 in the carrier, and a 220 in the crane, we had to change the 903 once, that was a real job! terry Also seen alot of the 10 ton trucks with the 903 engine.
  12. terry
    One of the best looking R model series, besides the RD800. terry
  13. terry
    Not alot of them, but there out there. terry
  14. terry
    Remember these from army days in the late 60's, they were a real horse! terry
  15. terry
    Love that autocar, and quite the 2 cycle engine! terry
  16. terry
    Bet that 400 series is a scania! terry
  17. terry
    learn something new everyday! terry
  18. terry
    Make sure your donor axle has the same spring width and same center bolt hole to hole as the old axle., mack has different widths on these, depending on the model of the truck. terry
  19. terry
    I thought a mack jr. was a pickup? terry
  20. terry
    Sounds to be set up pretty good, but a little steep on price i would say. terry
  21. terry
    Not a good combo, the 2080 is real wide geared, a 1070 12 spd would be perfect with those rears, I drove a DM dump for years with a 12 spd. and 4.17 rears, would run 65 at 1600 rpm,s terry
  22. terry
    if it still has the gas rears it will be a slow runner. terry
  23. terry
    Quite the run for a 237!! terry
  24. terry
    Like all the 237 mack engines people try to say are 300's. terry
  25. terry
    Years ago there was a smaller series of cummins engines, i'm sure somebody will post with better info. used to see them in local redimix trucks with automatics. terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...