Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,212

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    Anybody know anything about that END 465 diesel,can't say i do. terry
  2. terry
    400 series can also be a scania or the old small cummins V8. terry
  3. terry
    broke is broke! A blown fire ring is not going to heal itself. terry
  4. terry
    Don't know the weight difference, but I would go with the heavier body, you won't regret it. The thicker body will stay straighter for alot longer. terry
  5. terry
    See how far you go on some of these new electronic controlled diesels! As far as changing your mind on anything I think your the know it all that will not change. terry
  6. terry
    Probably not the same, but maybe modify to work in a B model. No way near a bolt in procedure! terry
  7. terry
    A classic for sure! They will work day after day without the new truck problems! terry
  8. terry
    I ran a quad behind a 237 for a whole bunch of years with no problems, but I was the only driver. terry
  9. terry
    They look real good like that ! terry
  10. terry
    Mack 2060-70-80 are all.60 overdrive. terry
  11. terry
    Does the G cab raise like a F model, almost forgot, very,very nice truck there. Terry
  12. terry
    i love original!! terry
  13. terry
    If that is the case, might work good for you. but with what glenn said on that series, will that series handle the torque of that 300l engine? Them double countershaft's do not handle the torque nearly as good as a triple countershaft mack trans. terry
  14. terry
    those ratio rears will only work with the 2060, 2070, or 2080 trans. anything else will be REAL slow. terry
  15. terry
    timing?
  16. terry
    Wonder if I get the seriel no. from this truck, would the info. from the mack museum tell if it was one of these trucks? terry
  17. terry
    Does anybody know what seriel no. range these were in, I might know of a local one here in my area. Is there any other way to identify one? terry
  18. terry
    Some say use a rolling pry bar between inner bearing and seal, I use a long drift and knock bearing and seal out together. terry
  19. terry
    Outstanding job! ! terry
  20. terry
    Well looks like they are trying to make it right. good for you. terry
  21. terry
    looks outstanding!! terry
  22. terry
    So are they going to help with replacing axles? terry
  23. terry
    Was talking about the original poster. terry
  24. terry
    Got to agree with ekennedy21 on this one, there are factory superliners with cummins engines. terry
  25. terry
    Just use the jack with a piece of 2X4 as long as the width of the pan and you will be fine. terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...