Jump to content

terry

Pedigreed Bulldog
  • Posts

    2,420
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by terry

  1. Isn't the back curved? terry
  2. just double check how battery cables are wired to starter to figure out if it is 12 or 24 volt starter, might be able to look on starter to see voltage. terry
  3. Your going to have to give a little more info than that. terry
  4. Nobody rebuilds parts anymore, I used to take brake cans apart and change service and emergency diaphrams. terry
  5. The duplex, triplex and quad just had a reverse spirial on input shaft to push oil back, no lip seal. terry
  6. Maybe a bad injector slobbering fuel? terry
  7. Might be a little on low side, but I have seen these engines run this way for years and years. Nothing to get concerned about. terry
  8. There are plastic or fiberglass ones out there, we have some on trucks at work. No idea where they came from. terry
  9. better than going to China! terry
  10. Got your work cut out for you! Best of luck . terry
  11. About a 500.00 dollar item. terry
  12. One ugly ass hood, nice truck besides the hood! terry
  13. If you are describing the front cover, that is normal. terry
  14. my guess is late 60's, early 70's terry
  15. I'll bet theres alot of companies building older engines for glider kits. Sure alot less troubles. terry
  16. You could use the back rear off a mack tandem, but you have to come up with a suspension. terry
  17. Motor must have been updated, A 685 should be a 237 i believe. terry
  18. very nice ride! ! terry
  19. pretty much anything repo needs to be worked on! terry
  20. It is a guess, but I would say with the maxidyne series. terry
  21. What is a Goose Island hood? terry
  22. looks pretty straight, how does the V8 run? terry
  23. some real workhorses there! terry
×
×
  • Create New...