terry
-
Posts
2,356 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by terry
-
Are you sure EH's were built that late? terry
-
It's Easy Being Green
terry replied to j hancock's topic in Antique and Classic Mack Trucks General Discussion
That's my idea of being green! terry👍👍 -
Loved there music too, on the old 8 track tape player!! terry
-
E9 1985 V injection pump parts breakdown
terry replied to Puppyluv's topic in Engine and Transmission
Have you checked all fuel lines supply and return? Also the supply pump first? terry -
Not a bad looking truck or price for the year. 👍👍 terry
-
Not a bad looking truck for a 55! terry
-
It will work, just the low range is not as low, don't know if that will make any difference in what you are doing. terry
-
Right you are, missed that no. 1 on the end. terry
-
Should be exactly what he is looking for. terry👍
-
Wedding Pics
terry replied to Superdog's topic in Antique and Classic Mack Trucks General Discussion
👍👍👍 -
You suppose they miss all the emission problems? might be a little underpowered, but run trouble free.👍👍 terry
-
yes a real quick answer, to run the 12,13, or 18 you have to change rear ends, that T2070 is run with about a 5.50 rear. know if you change to a 4.17 rear you will have a real runner, but your kind of under powered with the 300 horses. terry
-
👍👍👍 terry
-
Real simple to do, surprised they still have kits for it.👍 terry
-
The truck that I drove was a dump, not a good combo for a tractor, Pretty underpowered, does your 350 pull up to that 60MPH pretty good? As for as them temperatures the worse thing I have found is being plugged between intercooler and radiator. taking intercooler clear out and steaming will help alot That E7 350 is a good engine. On that 676 engine, years ago I put a dump together with that engine and a 12 spd. overdrive with 4.17 rears and the pump turned up to 2300 RPM's it would surprise a lot of people. terry
-
It's hard to see but that looks like a 67 series trans. terry
-
There was a E7 maxidyne up to about mid 90's they used the 6,7and 8spd with that real wide overdrive, and used about a 5.50 or so rear ratio. terry I drove one for about 4 years
-
I liked that double coin RLB 450 for a dump truck, the only downside it hold a million little rocks to be kicked out! terry
-
Rare MH613 dump
terry replied to james j neiweem's topic in Antique and Classic Mack Trucks General Discussion
Only thing you can not bridge any weight. terry plus easy to put to much weight on steer axle. -
As rob said be sure to carefully check out the trunnion bushing, might be looser than you think. terry
-
I run one of them cable backhoes in Army AIT training FT. leonardwood Mo. in 1967, quite the learning curve!! terry
-
B-73 Restoration
terry replied to mattb73lt's topic in Antique and Classic Mack Trucks General Discussion
love that P/U haven't seen one of those for a long long time!! that one might be a little newer that I was thing of, what year? seems we had some of those in Viet Nam. terry👍👍 good luck on the blaster!! -
Four fully restored antique trucks for sale
terry replied to Mark Shuttleworth's topic in Trucks for Sale
so can you get prices and post on here? Then if somebody is interested they can call him, without bothering him if they are out of there price range? terry -
very nice set up!! 👍👍 terry
BMT Forum Logo
