Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,358

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    If I remember right, I believe some years ago I seen an ad in a truck magazine on a Beard concrete and I do think it was in Conn, had a whole bunch of old macks for sale. terry
  2. terry
    👍👍👍
  3. terry
    Is the plastic to cloudy to see oil level? terry
  4. terry
    Even a single axle! terry
  5. terry
    what rob said, I have tried to pop the center plug out when they are hard and broke the plastic, pry out carefully. terry
  6. terry
    Should be stamped on front on that flat spot next to power divider, might have to wire brush it to see it. terry
  7. terry
    I would say at 1600 RPM should be about 60MPH, what ever the engine top RPM will dictate top speed. terry
  8. terry
    might help if you post a little more info, does it run, drive alright, brakes work, I believe a A20 is hydraulic brakes? does it have a title? looks like it had water in it, any effects from that? terry
  9. terry
    Outstanding job👍👍👍 Is it a working truck? To nice to put on the road, but sure a lot less trouble than all them trucks you see on the side of the road with emission and electrical problems. terry
  10. terry

    Autocars

    terry replied to RFCDrum's topic in Other Truck Makes

    Can't tell by the pic, but I bet that trailer has more than 8 tires on it, probably 8 on each axle. terry
  11. terry
    That guy that I posted on earlier with the H model 955's and 977's also has about 5 983's like said before they are a real beast, he uses one in his landfill to push and compact rubble. terry getting about impossible to find parts for them
  12. terry
    Them H model series are a classic!! I guy I used to work for has about 20 H model 955's nd 977's still uses them as a fill in machine. I actually remember when he had some stick 977's I believe they called the a 20A machine. terry
  13. terry
    A lot simpler times then! terry
  14. terry
    Can also leak in the shifter into the wrong side . terry
  15. terry
    Pretty straight looking old r model! terry
  16. terry
    Keep us posted on how it goes, from a V.N. vet, thank you for what you are doing. terry
  17. terry
    Check Manders Lakeville MInn. terry
  18. terry
    looking like a truck again, fantastic work!! 👍👍 terry
  19. terry
    If I am not mistaken some of the early U models had the bump for the short handle but used a U shaped long handle that started from the top two bolt holes, then came out and down a ways then doubled back up to connect to the bottom two holes. I believe I had one of these handles out in my shop, I will have look to see if it is still there. terry
  20. terry
    I had an older Dm years ago with that tank and hoist, it was a Galion, ran it a lot of years with no problems. terry
  21. terry
    That tank and hoist looks like an older galion set up. terry
  22. terry
    What do you suppose that rig weighs? terry
  23. terry

    1969 Brockway

    terry replied to h67st's topic in Trucks for Sale

    Looks like he is pretty proud of all his stuff!! terry
  24. terry
    new rails, sounds like a major undertaking, should make a real good truck for a lot of years, probably worth the hassle to stay away from all the emission problems. terry👍👍
  25. terry
    Don't know if there were any without muffler from the factory, anything I ever seen without a muffler somebody took it off and made the own brackets and robbed a skinny heatshield off of something else. terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...