Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,367

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    I have driven the 6'7and 8speed in these trans,1st hi is plenty low to start on. terry
  2. terry
    And trouble free too!! terry
  3. terry
    Good luck you have a real PROJECT there!! terry
  4. terry
    Don't know if it can be done, bet it would be a real challenge. terry
  5. terry
    You do not the hi-lo like a splitter. If off road used proper low range gear, when on pavement put range in direct and shift the main 1-2-3-4-5 in that order. terry
  6. terry
    if you get it all together you will love it!
  7. terry
    If you are having banging and knocking you better have a tow truck on speed dial!! When what ever finally gives up you will know what is wrong. terry
  8. terry
    I once had a DM dump had a 285 hp, with the overdrive 12 speed and 4.17 rears had the pump turned to run up to 2300 if I wanted, it could bury the 80 MPH speedometer! It was a real sleeper. terry
  9. terry
    The 1071 is a extra low, low hole gear Lower than the 107 series. terry
  10. terry
    They used a single or double disk push clutch or double disk pull clutch. terry
  11. terry
    I have seen thrust washers come out and you get a whole bunch of end play, and you do not need a dial indicator to tell if something is way out of limits, get a pry bar and get under and start checking yourself! terry
  12. terry
    E6 is the older style dry liner block with the 4 valve head, e7 is wet liner block with 4 valve head. terry
  13. terry
    Broken crank?
  14. terry
    When the front got hit,did it get hit hard enough to hit damper on front? Sounds like a connection there. terry
  15. terry
    has thrust on crank been checked? terry
  16. terry
    looks like a real workhorse!! terry
  17. terry
    Them old school R models were hard to beat,were like tanks!! They would run forever. terry
  18. terry
    Would be ideal for a farm truck, that is a bullet proof combination, will last a lot of years with no serious trouble. terry and the tip turbine will be fine!
  19. terry
    All depends on your working conditions. terry
  20. terry

    Road Closed

    terry replied to B MACK's topic in Odds and Ends

    Wheres the road!!
  21. terry
    Some kind of a roller? terry
  22. terry
    What is an r-title? terry
  23. terry
    That looks like maybe a 12,000 lb. axle, the 18 or 20,000 axle has kind of a s curve there. terry
  24. terry
    Is this that 3 leaf tapered spring setup? terry
  25. terry
    Not a good one for heavy duty use. terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...