terry
-
Posts
2,381 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by terry
-
Even a single axle! terry
-
what rob said, I have tried to pop the center plug out when they are hard and broke the plastic, pry out carefully. terry
-
Should be stamped on front on that flat spot next to power divider, might have to wire brush it to see it. terry
-
I would say at 1600 RPM should be about 60MPH, what ever the engine top RPM will dictate top speed. terry
-
The A might be for sale
terry replied to bil2912's topic in Antique and Classic Mack Trucks General Discussion
might help if you post a little more info, does it run, drive alright, brakes work, I believe a A20 is hydraulic brakes? does it have a title? looks like it had water in it, any effects from that? terry -
Rd 6 wheeler
terry replied to brian@cjcontractors.net's topic in Antique and Classic Mack Trucks General Discussion
Outstanding job👍👍👍 Is it a working truck? To nice to put on the road, but sure a lot less trouble than all them trucks you see on the side of the road with emission and electrical problems. terry -
Can't tell by the pic, but I bet that trailer has more than 8 tires on it, probably 8 on each axle. terry
-
That guy that I posted on earlier with the H model 955's and 977's also has about 5 983's like said before they are a real beast, he uses one in his landfill to push and compact rubble. terry getting about impossible to find parts for them
-
Them H model series are a classic!! I guy I used to work for has about 20 H model 955's nd 977's still uses them as a fill in machine. I actually remember when he had some stick 977's I believe they called the a 20A machine. terry
-
One Hell of a View
terry replied to j hancock's topic in Antique and Classic Mack Trucks General Discussion
A lot simpler times then! terry -
Can also leak in the shifter into the wrong side . terry
-
Pretty straight looking old r model! terry
-
Keep us posted on how it goes, from a V.N. vet, thank you for what you are doing. terry
-
Check Manders Lakeville MInn. terry
-
B-73 Restoration
terry replied to mattb73lt's topic in Antique and Classic Mack Trucks General Discussion
looking like a truck again, fantastic work!! 👍👍 terry -
If I am not mistaken some of the early U models had the bump for the short handle but used a U shaped long handle that started from the top two bolt holes, then came out and down a ways then doubled back up to connect to the bottom two holes. I believe I had one of these handles out in my shop, I will have look to see if it is still there. terry
-
I had an older Dm years ago with that tank and hoist, it was a Galion, ran it a lot of years with no problems. terry
-
That tank and hoist looks like an older galion set up. terry
-
If Mad Max had driven a B Model
terry replied to j hancock's topic in Antique and Classic Mack Trucks General Discussion
What do you suppose that rig weighs? terry -
Looks like he is pretty proud of all his stuff!! terry
-
1979 R686ST in working clothes.
terry replied to JoeH's topic in Antique and Classic Mack Trucks General Discussion
new rails, sounds like a major undertaking, should make a real good truck for a lot of years, probably worth the hassle to stay away from all the emission problems. terry👍👍 -
Don't know if there were any without muffler from the factory, anything I ever seen without a muffler somebody took it off and made the own brackets and robbed a skinny heatshield off of something else. terry
-
The top gear in the six spd is direct, no overdrive, and a 4.17 rear with a direct trans means about 60 to 65 at top RPM. terry
-
You will really like the top end, just don't know how deep first gear is with the 9 spd. Should run about 60 MPH at 1600 RPM'S, RTO does mean an overdrive right? terry
-
Are you sure EH's were built that late? terry
BMT Forum Logo
