Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,367

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    What is a soft nose LJ?
  2. terry
    maybe just put heavier springs with the cast caps. If you go with the cut off route make sure everything is not worn out.
  3. terry
    I have owned a F model with a quad and a two stick six speed.
  4. terry
    Check with Manders diesel, Lakeville Minnesota.
  5. terry
    Can't help on the numbers, but i do remember R model macks in the mid and later 60's with 318 detroits.
  6. terry
    I can't imagine what a 6-71 would do to a one ton front end!
  7. terry
    They are a real easy engine to adjust the valves while running, and the maxidyne converted i believe is maxidyne liners with the heads scored for the fire rings. terry
  8. terry
  9. terry
    I do believe the tip turbine went to 315 horsepower. Terry
  10. terry
    Best tranny mack ever made! Terry
  11. terry
    686 Would be a 285 with a 5 or 6 spd, a 690 would be a 300 or350 with a 9 spd mack or fuller. Terry
  12. terry
    Are the injector lines the same?
  13. terry
    That is a bargain for that 12 spd. Best trans. mack ever built! Terry
  14. terry
    When you take them tank straps off, be sure to check tank it self for rust under the straps, It usually gets paper thin there. If so, take some thin strap and weld to tank where the tank strap wraps at. Will save you from trouble later. Terry
  15. terry
    Have to agree with the early 237 idea, terry
  16. terry
    Yes any 72 series with a 0 at the end is a double overdrive, either a TRT or a TRQ. Terry
  17. terry
    No 0 is a single overdrive in the back box, all triplex and quads are overdrive in the back box, A 0 like in a TRQ7220 is overdrive in the front, so there is your double overdrive. terry
  18. terry
    Try Manders diesel in Lakeville Minnesota, they parts out lots of macks. Terry
  19. terry
    I always thought the "adjustable" part was to keep moving the bottom thrust bearing upward as it wears to keep the axle beam from dragging on the spindle. terry
  20. terry
    Look at the engine pics. the frame is not tall enough for a DM, it is a U model. Terry
  21. terry
    You need to find a TRT1070 12 spd. They are about 12% overdrive, I had one in a DM with 4.17 rears, would run 65 mph at about 1600 rpms. terry
  22. terry
    Manders just outside of Minneapolis used to have a ton of mack cabs. terry
  23. terry
    With that mileage on the trans and engine with good servicing should last a real long time. terry
  24. terry
    Check the gasket around the vent in the roof. They will leak with age. terry
  25. terry
    you will split it open like a melon! Terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...