Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,438

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    Thanks for that info. Spent "69" there myself.
  2. terry
    That is a B733 has a cummins with a triplex.
  3. terry
    You will have alot less down time with a truck like that! Besides easier to work on.
  4. terry
    If you are talking both 107 series trannys, they are the same except the 12 spd. has two lower creeper gears. terry
  5. terry
    No. If you have shifted a mack 5 speed you can shift a 12 speed.
  6. terry
    Some early ones were direct.
  7. terry
    need a little more info than that.
  8. terry
    RS would be a straight frame.
  9. terry
    I wasn't sure but I thought he was talking about the old 107 series six speed.
  10. terry
    Might not be quite as fast as the new ones, but will run circles around them on down time!
  11. terry
    The B75 has more room to use the 237/285 engine but in a B61 you have to use the shorter water pump and the shorter crank hub. terry
  12. terry
    Check out the low ratios on your nine speed and compare to the six speed, the six speed is the same as your five speed with a low range. Also some six speeds have a even lower low range ratio. terry
  13. terry
    If the trans is in good shape it should last a long time with not lugging it down like you would do with a 5 or 6 speed.
  14. terry
    What model is it? What was it used for?
  15. terry
    I have seen 73's with green steel dash and straight back cab and also with beige plastic dash and the deeper cab. depends when they were made terry
  16. terry
    Would be interesting to see what he thinks of these in a year or two. terry
  17. terry
    Looks like she has her left leg bent up with big toe sticking up.
  18. terry
    Try Manders diesel, Lakeville Minn.
  19. terry
    A popping noise in the exhaust when you let off of it can be a loose exhaust seat. They can run a long time like this. terry
  20. terry
    Crank thrust washers?
  21. terry
    Good luck on the move, sometimes a move is a good thing. A few years down the road you will wish you would have done it sooner. Also loved the birthday pizza!
  22. terry
    Think they are talking the two bolts behind the side cover. terry
  23. terry
    Looks awfully good just that way!
  24. terry
    That era of macks were bullit proof, very little trouble with them!
  25. terry
    I believe if you take pump off with the adapter with the three adapter to block bolts it will only go on one way and not move timing, the 237 285 pumps are this way.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...