terry
-
Posts
2,367 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by terry
-
A price up front will weed out a lot of responses. terry
-
Not a bad price for all that work that has been done, if your into that kind of conversion. terry
-
Right behind fill plug on left side is a flat area, scrape with a putty knife then a wire brush, there will be a TRT72 or 720, that will tell what front box is, back box is always a overdrive on a triplex or quad. terry Also a aluminum back box will be a TRTL series
-
I would go with about a 5.13 ratio, is your triplex a single or double over? terry
-
Just checked one of my old manuals 1969 version that exact model no. was TRDXL107 for the low hole one and a TRDXL1070 for the overdrive one. terry
-
X107A is a six speed with air operated back box, a true twelve spd is 3 boxes all bolted together, a real long trans. terry
- 1 reply
-
- 1
-
-
When they went to the 107X, reverse was put on aux. stick, then you had 5spds. in reverse along with direct and a low gear, also 1071X had a lower low gear in the aux. terry
-
no it was as I described above, It was before the X107 six spd, only made for a couple of years, I will dig in one of my old mack service manuals to check, If I remember it had an interlock to use the low range with the main in 1 st gear, and the overdrive one had to have the main in 5th gear. terry
-
if I am not mistaken that was the first version 6 spd, you shifted the main 5 times and the aux. box from direct to overdrive for the earlier deeper rear ratios, they also had one the aux. went from direct to low, for a lower first gear. terry
-
B-73 Restoration
terry replied to mattb73lt's topic in Antique and Classic Mack Trucks General Discussion
That is a bare bones cab!! Should look real good when you are done, like a new truck!! terry👍👍👍 -
That was the first version of back up alarm, remember them well!! terry
-
R model cl lamps not working.
terry replied to Coenut's topic in Electrical, Electronics and Lighting
Really looks terrific.👍👍👍 terry -
or duplex with a 3 spd auxiliary. terry
-
Mack MH Freedom Series trucks
terry replied to phildirt's topic in Antique and Classic Mack Trucks General Discussion
Outstanding👍👍👍 terry -
Looks like $$$ to me!! terry👍👍👍
-
Rear differential decode, 1990 RD690S
terry replied to 90rd690's topic in Modern Mack Truck General Discussion
If it is maxadyne and 7 spd should be around a 5.50 ratio. terry -
love the winfall pic's, the R model looks good too!! terry👍
-
There are some members on here that could help you, but you have to give a little more info than that. terry
-
A beautiful pair of trucks there!!👍👍👍 terry
-
Excellent!! 👍👍👍
-
Awsum!!👍👍👍
-
1989 Mack RB
terry replied to j hancock's topic in Antique and Classic Mack Trucks General Discussion
drove one of the for years ,not a bad truck at all, the front spring is longer than a regular R model, lets it ride a little smoother on the steer axle. terry -
There are wider spacers available, also used to use some add on spacers if you needed just a little spacing, don't remember what they were called, about 1/8 or 3/16 thick, they slid on right on with original spacer. terry
-
Love the pics! Even the museum ones! terry👍👍
-
Were they still stamped on front of carrier in 05? terry
BMT Forum Logo
