mowerman Posted January 24 Share Posted January 24 They are very hard to find.good luck… bob Quote Link to comment Share on other sites More sharing options...
JoeH Posted January 28 Share Posted January 28 What causes the steering wheels to crack? Is it UV? Quote Link to comment Share on other sites More sharing options...
mrsmackpaul Posted January 29 Share Posted January 29 Truck drivers using them as a grab handle I reckon doesn't help Paul Quote Link to comment Share on other sites More sharing options...
mowerman Posted January 29 Share Posted January 29 Yeah I don’t know what it is either. I had one crack on me. I just happened to have my hand right on it turning a corner and it cracked right under my hand. It wasn’t even that hot out it was a white 9000 way way back long time ago. Quote Link to comment Share on other sites More sharing options...
Freightrain Posted January 29 Share Posted January 29 Raneys has some retro steering wheels available. I've been contemplating getting one for my B. Likely better then trying to restore my old wheel. Once the steel core starts to rust, it will distort again and crack. White version: https://www.raneystruckparts.com/20-ivory-retro-bone-3-spoke-steering-wheel/ 2 Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment Share on other sites More sharing options...
mattb73lt Posted January 30 Share Posted January 30 Age mostly. As plastic ages it becomes brittle and actually shrinks. Then add the UV's, solar heating, hot and cold cycles and someone wrenching on it all day, cracks will form. If you watch some, you'll see gaps opening up where it's cracked. Plastic is a petroleum product and "off gasses" as it dries and cures. Hence the PVC smog that forms on the inside of you cars windows and the New Car smell it has when new. Then it smells like sweaty man ass, fuel, oils and exhaust after a while. 2 Quote Link to comment Share on other sites More sharing options...
Popular Post Freightrain Posted January 30 Popular Post Share Posted January 30 52 minutes ago, mattb73lt said: Then it smells like sweaty man ass after a while. Hey!! I'm offended by that remark!!! 🤣🤣🤣🤣🤣🤣🤣🤣 1 2 Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment Share on other sites More sharing options...
Mark T Posted January 30 Share Posted January 30 3 hours ago, mattb73lt said: Age mostly. As plastic ages it becomes brittle and actually shrinks. Then add the UV's, solar heating, hot and cold cycles and someone wrenching on it all day, cracks will form. If you watch some, you'll see gaps opening up where it's cracked. Plastic is a petroleum product and "off gasses" as it dries and cures. Hence the PVC smog that forms on the inside of you cars windows and the New Car smell it has when new. Then it smells like sweaty man ass, fuel, oils and exhaust after a while. forgot stale ciggy smell 1 1 Quote Link to comment Share on other sites More sharing options...
Popular Post JBushneck Posted January 30 Author Popular Post Share Posted January 30 Was able to get the cab in position. Still much to do but on track to finish by May. Waiting on cross members and fuel tanks to come back from sand blasting shop. Plenty of small things to stay busy on. 5 Quote Link to comment Share on other sites More sharing options...
mowerman Posted January 31 Share Posted January 31 Wow my God you’re amazing thanks for the update … great progress… bob Quote Link to comment Share on other sites More sharing options...
Popular Post JBushneck Posted February 6 Author Popular Post Share Posted February 6 Went to Florida for the weekend so didn’t work on the project until after work today. Was happy my crossmembers were finished when I got home so I was able to install them and remount the spring hangers and springs. Finished the day with some paint on the back of the frame. Next step will to pull the rear back under and remount and then if weather is decent over the weekend put some paint on the cab. 5 2 Quote Link to comment Share on other sites More sharing options...
Popular Post JBushneck Posted February 10 Author Popular Post Share Posted February 10 Here is another update. Was able to get the rear and the front end back under the chassis. Took advantage of the nice weather and painted the cab. Now to finish hooking up air lines. 7 2 Quote Link to comment Share on other sites More sharing options...
Mark T Posted February 10 Share Posted February 10 Holy cow, you're May finish date shouldn't be a problem at all at the rate you're going. 1 Quote Link to comment Share on other sites More sharing options...
skydawg Posted February 12 Share Posted February 12 Do you have guys working with you? Quote Link to comment Share on other sites More sharing options...
mowerman Posted February 12 Share Posted February 12 Yes, that’s amazing. Great progress. Thanks for the updates…. Bob Quote Link to comment Share on other sites More sharing options...
70mackMB Posted February 12 Share Posted February 12 l take it is going to be a slammed rat rod? /s No! No! No! lt's sure is coming along very nicely. Never saw one sitting down on just wheels like in this picture. .....Hippy On 2/10/2024 at 5:19 PM, JBushneck said: Quote Link to comment Share on other sites More sharing options...
mowerman Posted February 12 Share Posted February 12 I was kind of wondering that myself why he had the rims on it??????? Quote Link to comment Share on other sites More sharing options...
Popular Post JBushneck Posted February 12 Author Popular Post Share Posted February 12 This Mack is not going to be a slammed rat rod. I have it on rims so I will be able to get It out of the garage. When finished I will put the 11R-22.5 tires back on. The disadvantage of only having an 8’ door is I’m limited to project size and have to get creative. To skydawgs question-I’m by myself. No other help on this project. 3 1 Quote Link to comment Share on other sites More sharing options...
mowerman Posted February 12 Share Posted February 12 Oh gotcha I guess none of us thought of that. Looks like you’re gonna have the fastest truck restoration in US history you could start your own TV show like those mechanical rock stars ha ha. Quote Link to comment Share on other sites More sharing options...
skydawg Posted February 13 Share Posted February 13 You`re one heck of a go-getter. Quote Link to comment Share on other sites More sharing options...
mechohaulic Posted February 13 Share Posted February 13 23 hours ago, mowerman said: I was kind of wondering that myself why he had the rims on it??????? actually on rims is a spectacular idea; not only easier to move around; no damage to concrete floor or wheel spokes. and as mentioned the lower height for door clearance but easy of working on 2 Quote Link to comment Share on other sites More sharing options...
Popular Post JBushneck Posted February 24 Author Popular Post Share Posted February 24 My brother was nice enough to bring the engine down from NY yesterday. Should have in later today. 3 Quote Link to comment Share on other sites More sharing options...
mowerman Posted February 24 Share Posted February 24 We must’ve missed something. Why was the engine in New York? Is it a different one than what was in there thanks for the update…. Bob 1 Quote Link to comment Share on other sites More sharing options...
Popular Post JBushneck Posted February 24 Author Popular Post Share Posted February 24 2 part answer to your question. The truck was in NY at my fathers and I have been bringing it down piece by piece as I assemble it. I have decided to put a newer engine in it with a Jake Brake. 4 Quote Link to comment Share on other sites More sharing options...
JBushneck Posted February 25 Author Share Posted February 25 We we set it the engine yesterday morning and then spent the day doing fun stuff. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.