Jump to content

terry

Pedigreed Bulldog
  • Posts

    2,360
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by terry

  1. I have 73's with steel or plastic dash. Depends if an early or later one built that year. terry
  2. makes you glad you were a younger man when you tackled that!!
  3. If they still made them, bet they could not keep up with orders! terry
  4. if the engine was out of a cabover it is stamped backside of block, right below where block and head meet. terry
  5. Them old school parts and machine shops are getting hard to find!!
  6. Some real brutes there!! terry👍
  7. Looks like an overdrive on the main box, go from 4th hi-split right to 5th high-split. No splitting 5th gear, the rear box is an overdrive too. terry If the diagram matchs your gearbox, Trans model no. should be on the left side of main box.
  8. Them look like just a tee fitting, one for service and one for emergyncy maybe. terry
  9. Kind of a deep rear ratio for a 9 spd. terry
  10. terry

    mrsmackpaul

    Looks like you have a full plate of things to do!! terry👍
  11. If there is only one with that engine that was built, should be in somebodys museum. terry
  12. Black superliners are just cool!!!👍
  13. If you read his first post, he has done this. terry
  14. Don't even have the year listed. terry
  15. Can't figure why somebody wouldn't have a price listed. Sure would make it easier. terry
  16. pretty hard to change that set up unless you change rears too. the 2070 has about a 5.50 rear end ratio. terry
  17. And a whole bunch of wiring. terry
  18. Looks like a nice one to start with!! terry👍
  19. got to be the best looking meatloaf ever!! the ladies don't look to bad either!! terry
  20. Not to change the subject, but isn't that pump similar to the 6.9 and 7.3 engine pumps in the ford pickup's terry
  21. Maybe just a close up to show miles. terry
  22. 250 is a real good engine, of course all pre electronic mack engines were bullet proof!! terry
  23. It's a steel dash and doesn't look into to bad a shape. terry
×
×
  • Create New...