Onyx610 Posted October 30, 2022 Share Posted October 30, 2022 On 10/30/2022 at 3:46 AM, Joey Mack said: That is awesome... no never knew.. Wine and O.J. is actually pretty good.. just sayin'... Expand not gonna lie, been there….pretty good 1 Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-514033 Share on other sites More sharing options...
Hayseed Posted October 30, 2022 Share Posted October 30, 2022 On 10/30/2022 at 3:41 AM, Onyx610 said: Never made it to production. It was 885 cid. Bore and stroke was 5.375”X 6.5” Expand Well That's My new thing for Today learnt...Wonder Why It Never Made It to Production..?? Looks like E9 Rocker Covers & maybe Heads Too.. Quote "Be who you are and say what you feel...Because those that matter...don't mind...And those that mind....don't matter." - Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-514037 Share on other sites More sharing options...
Onyx610 Posted October 30, 2022 Share Posted October 30, 2022 On 10/30/2022 at 5:58 AM, Hayseed said: Well That's My new thing for Today learnt...Wonder Why It Never Made It to Production..?? Looks like E9 Rocker Covers & maybe Heads Too.. Expand I believe you are correct. I think it used a lot of the E9 components. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-514038 Share on other sites More sharing options...
fjh Posted October 30, 2022 Author Share Posted October 30, 2022 On 10/30/2022 at 3:29 AM, Onyx610 said: Was there any issues that you guys saw with these engines? Expand The E9 had its issues! Valve seat issues / Lifter/ Cam failure, head bolts would break head gaskets leaked. piss poor engine brake this is a case of failure By design the brake as we all know has always been sort of ho hum on most Mack engines up till the power leash , water pumps failed a bunch at the begining! As usual Most of the issues resolved Before the end of the run on these ! The other weak point on these was the counter bore ledges would sometimes crack ! In my opinion the head bolts were under sized An really should have been fine thread and or studs! Thinking back on it How ever the 866 had fine bolts and they would leak also! they also had the liner ledge issue! If the big Six had entered production I would have hoped they would have used the E7 style liner set up but who knows ,it never got off the ground! also notice they left room for the econovance there in that design they were a forward thinking bunch of guys! But they were working with stuff they mostly already had they were working on a budget in my mind! That's likely why it never got finished! Money constraints ! 1 Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-514044 Share on other sites More sharing options...
The Rubber Duck 006 Posted October 30, 2022 Share Posted October 30, 2022 If there's one thing on my 2016 CHU613 Pinnacle I could change it would the steering shaft linkage set up. The plate it hooks to blocks convient access to the alternator and such. Also I would give the MP8 atleast 500horse out of the factory. Other than the DPF emissions junk I'm very happy 😊 with the truck overall. Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-514056 Share on other sites More sharing options...
Onyx610 Posted November 10, 2022 Share Posted November 10, 2022 Hopefully I don’t have to use it…..if you know, you know…. Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-514693 Share on other sites More sharing options...
fjh Posted November 11, 2022 Author Share Posted November 11, 2022 On 11/10/2022 at 7:28 PM, Onyx610 said: Hopefully I don’t have to use it…..if you know, you know…. Expand Don't know if that fitting will stay in there at 40 psi how ever very innovative on your part Onyx ! which filter did you use? Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-514761 Share on other sites More sharing options...
Onyx610 Posted November 11, 2022 Share Posted November 11, 2022 (edited) I drilled it a size smaller than that fitting and wrenched it in and epoxied it in there. If it doesn’t I’ll get a metal cap and cut threads. What do you mean by filter?? Edited November 11, 2022 by Onyx610 Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-514779 Share on other sites More sharing options...
fjh Posted November 12, 2022 Author Share Posted November 12, 2022 On 11/11/2022 at 1:14 PM, fjh said: Don't know if that fitting will stay in there at 40 psi how ever very innovative on your part Onyx ! which filter did you use? Expand On 11/11/2022 at 4:51 PM, Onyx610 said: I drilled it a size smaller than that fitting and wrenched it in and epoxied it in there. If it doesn’t I’ll get a metal cap and cut threads. What do you mean by filter?? Expand I assumed by the look of the top there it was a filter you made the tool from! Guess I am a dumbass 🙃! Its round it fits the the hose I would go there if I needed to make a quick tool for pressure testing! And Volvo uses some perrty asshole sizes when it comes to most things! What ever fits! 2 Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-514842 Share on other sites More sharing options...
Joey Mack Posted November 12, 2022 Share Posted November 12, 2022 Now that you say it 'F'... It does look like the bottom of a filter.. Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-514845 Share on other sites More sharing options...
fjh Posted November 12, 2022 Author Share Posted November 12, 2022 On 11/12/2022 at 2:25 PM, Joey Mack said: Now that you say it 'F'... It does look like the bottom of a filter.. Expand Yup I 'm game I would try it If I had nothing else!😬 Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-514846 Share on other sites More sharing options...
Joey Mack Posted November 12, 2022 Share Posted November 12, 2022 I would probably use a CAT Hyd./Oil filter.. I think they are thicker, Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-514847 Share on other sites More sharing options...
Mark T Posted November 12, 2022 Share Posted November 12, 2022 (edited) On 11/12/2022 at 2:30 PM, fjh said: Yup I 'm game I would try it If I had nothing else!😬 Expand That looks like a plastic cap off plastic pipe. They're thick enough to put up with considerable PSIs for testing when you thread a hole drilled through it. Easily can hold enough to check for leaks.....and it's a cheap way to test. Onyx moonlights as a plumber 😃 Edited November 12, 2022 by Mark T more information 2 Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-514850 Share on other sites More sharing options...
Onyx610 Posted November 12, 2022 Share Posted November 12, 2022 On 11/12/2022 at 3:23 PM, Mark T said: That looks like a plastic cap off plastic pipe. They're thick enough to put up with considerable PSIs for testing when you thread a hole drilled through it. Easily can hold enough to check for leaks.....and it's a cheap way to test. Onyx moonlights as a plumber 😃 Expand Mark you are correct, it’s a pvc end cap Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-514853 Share on other sites More sharing options...
Onyx610 Posted November 12, 2022 Share Posted November 12, 2022 On 11/12/2022 at 2:22 PM, fjh said: I assumed by the look of the top there it was a filter you made the tool from! Guess I am a dumbass 🙃! Its round it fits the the hose I would go there if I needed to make a quick tool for pressure testing! And Volvo uses some perrty asshole sizes when it comes to most things! What ever fits! Expand Now I see what you mean haha. Yea I guess the picture does make it look that way. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-514854 Share on other sites More sharing options...
james j neiweem Posted November 18, 2022 Share Posted November 18, 2022 Were there ever any Mack big 6's (885's) put in production. Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-515438 Share on other sites More sharing options...
Onyx610 Posted November 18, 2022 Share Posted November 18, 2022 (edited) On 11/18/2022 at 5:43 PM, james j neiweem said: Were there ever any Mack big 6's (885's) put in production. Expand No they never made it that far. Sucks, would have loved to hear one of those. Edited November 18, 2022 by Onyx610 Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-515439 Share on other sites More sharing options...
Onyx610 Posted November 18, 2022 Share Posted November 18, 2022 (edited) There was also an E9 quad turbo engine, I think they went into tanks. Edited November 18, 2022 by Onyx610 More info Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-515440 Share on other sites More sharing options...
Onyx610 Posted November 18, 2022 Share Posted November 18, 2022 Looks like it’s been talked about on here before. Only decent info I could find on the E9 quad. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-515441 Share on other sites More sharing options...
Jamaican Bulldog Posted November 18, 2022 Share Posted November 18, 2022 On 11/18/2022 at 6:04 PM, Onyx610 said: There was also an E9 quad turbo engine, I think they went into tanks. Expand There is an ad right now on facebook page 'Mack E9 V8' for some of these engines and other E9 parts. Not sure if they were military or marine engines. Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-515447 Share on other sites More sharing options...
Onyx610 Posted November 18, 2022 Share Posted November 18, 2022 On 11/18/2022 at 7:36 PM, Jamaican Bulldog said: There is an ad right now on facebook page 'Mack E9 V8' for some of these engines and other E9 parts. Not sure if they were military or marine engines. Expand Very good possibly they were marine as well. wish there was more info/vids out there on these engines. Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-515448 Share on other sites More sharing options...
Jamaican Bulldog Posted November 18, 2022 Share Posted November 18, 2022 On 11/18/2022 at 7:39 PM, Onyx610 said: Very good possibly they were marine as well. wish there was more info/vids out there on these engines. Expand According to the add they are quad turbo 1200hp military engines 1 Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-515450 Share on other sites More sharing options...
Onyx610 Posted November 18, 2022 Share Posted November 18, 2022 On 11/18/2022 at 7:43 PM, Jamaican Bulldog said: According to the add they are quad turbo 1200hp military engines Expand What are they asking for them? Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-515451 Share on other sites More sharing options...
Mackpro Posted November 18, 2022 Share Posted November 18, 2022 On 11/18/2022 at 6:04 PM, Onyx610 said: There was also an E9 quad turbo engine, I think they went into tanks. Expand When I would go the the Mack schools in Atlanta and Chicago they had the big posters on the walls of the quad turbo engine. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-515456 Share on other sites More sharing options...
Onyx610 Posted November 18, 2022 Share Posted November 18, 2022 On 11/18/2022 at 9:43 PM, Mackpro said: When I would go the the Mack schools in Atlanta and Chicago they had the big posters on the walls of the quad turbo engine. Expand How cool would that be to been able to snag one of those! Little did you know then…. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/70593-if-you-had-the-opportunity-to-redesign-the-mack-chassis-and-the-mp-engines-what-would-you-change/page/6/#findComment-515458 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.