Vladislav Posted July 24, 2020 Author Share Posted July 24, 2020 (edited) 39 minutes ago, steve s. said: Thanks for taking us along on your trip Vlad. Enjoyed you pictures and story. Nice truck. Cruiseliners are not seen too often in my area of Pennsylvania. Yours looks to have a very nice floor. hopefully the rest of the cab is good and solid. I especially like the picture of the Pobeda. I have a Polish version, the Warszawa. Both are very rare in the USA. Steve You're welcome Steve. The floor is quite good and doesn't show any corrosion by the first observation. i sure will clean the dust off it and look more detailingly but it's shape seems promising. Some outer panels have bents and I would swap them by aluminium sheet since the most of the panels are straight cuttings. There's also a mess of rivets so better to install new ones instead of aftermarket spots. Of difficulties there's a lower part of the windscreen opening which has multiple cracks but I found out it's fiberglass so could be repaired. And the windscreens themself is one of the 1st points in the fixing list. I'm afraid I will need to bring the truck or the cab to a glass shop for fabricating well fitted windscreens. And this means I should fix the opening first. Unfortunately all that is not a deal of the day since plenty of current affair already take place. Interesting you have Warszavwa. They're pretty rare here, I just can remember one or two owned by people. Pobeda's are pretty common, just seldom seen on a road. Edited July 24, 2020 by Vladislav Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment Share on other sites More sharing options...
Vladislav Posted July 24, 2020 Author Share Posted July 24, 2020 19 minutes ago, j hancock said: WoW! WoW! Excellent journey and adventure! Have a 1976 Mack Cruiser brochure and it shows the frame measurement of 10.5" X .25" steel. From what I saw it's thicker. Going to grab a caliper and get precision figures. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment Share on other sites More sharing options...
james j neiweem Posted July 24, 2020 Share Posted July 24, 2020 Nice capture Vlad. If you spend a little extra money you can get those pants to reach your shoes.😃 1 Quote Link to comment Share on other sites More sharing options...
Freightrain Posted July 24, 2020 Share Posted July 24, 2020 1200 miles for a truck? Sure why not? LOL!! You could have your own "Roadkill" show. Just the issues with finding bridges over rivers has the US "Roadkill" show beat all around. Fantastic story Vlad. Thanks for sharing. The pictures are awesome and really give us a feel for what it is like traveling in Russia. 2 Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment Share on other sites More sharing options...
j hancock Posted July 24, 2020 Share Posted July 24, 2020 27 minutes ago, Vladislav said: From what I saw it's thicker. Going to grab a caliper and get precision figures. Just found a listing for an optional frame for a WS700LS using 10.5" X .375". Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
kscarbel2 Posted July 24, 2020 Share Posted July 24, 2020 This is a zoomed in view of the 1982 Macungie production Cruise-Liner brochure. Keen eyes will note that we borrowed this side view from our last Hayward production brochure. Note the 2-piece tube-type aluminum rim. 2 Quote Link to comment Share on other sites More sharing options...
Popular Post kscarbel2 Posted July 24, 2020 Popular Post Share Posted July 24, 2020 From the 1982 second generation (Macungie production) Cruise-Liner brochure, this is my favorite photograph. . 3 Quote Link to comment Share on other sites More sharing options...
Vladislav Posted July 24, 2020 Author Share Posted July 24, 2020 (edited) 3 hours ago, j hancock said: Just found a listing for an optional frame for a WS700LS using 10.5" X .375". Good point Jim. And right in time. I measured the rail and it's 3/8 x 10.4". The 2nd figure is not absolutely accurate so it seems as the option. The truck is WS785LS. Edited July 24, 2020 by Vladislav Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment Share on other sites More sharing options...
Vladislav Posted July 24, 2020 Author Share Posted July 24, 2020 2 hours ago, kscarbel2 said: From the 1982 second generation (Macungie production) Cruise-Liner brochure, this is my favorite photograph. . Great looking truck and I like the paint scheme. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment Share on other sites More sharing options...
Vladislav Posted July 24, 2020 Author Share Posted July 24, 2020 Any ideas on what the torpedo marker lights on Cruiseliner are? Some special style with the tail part hanging in the air. Never saw anything like that on other Macks nor another branded trucks. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment Share on other sites More sharing options...
kscarbel2 Posted July 24, 2020 Share Posted July 24, 2020 1 hour ago, Vladislav said: Any ideas on what the torpedo marker lights on Cruiseliner are? Some special style with the tail part hanging in the air. Never saw anything like that on other Macks nor another branded trucks. As I recall, 38MO363RP3 for R/U/DM was supplied buy Signal Stat, which was acquired by Truck-Lite. The bottom has a slight curve to match the cab contour. (The short version in the middle of an R/U/DM, ahead of the roof vent, was 38MO362RP3) https://www.ebay.com/itm/Semi-Truck-Bullet-Marker-Lamp-PAI-FLR-4302-Ref-Mack-8154-51631771-38MO363-/253996119453 I can't remember if the Cruise-Liner's "bullet" lamps had a flat bottom or not. 1 Quote Link to comment Share on other sites More sharing options...
Vladislav Posted July 24, 2020 Author Share Posted July 24, 2020 49 minutes ago, kscarbel2 said: As I recall, 38MO363RP3 for R/U/DM was supplied buy Signal Stat, which was acquired by Truck-Lite. The bottom has a slight curve to match the cab contour. (The short version in the middle of an R/U/DM, ahead of the roof vent, was 38MO362RP3) https://www.ebay.com/itm/Semi-Truck-Bullet-Marker-Lamp-PAI-FLR-4302-Ref-Mack-8154-51631771-38MO363-/253996119453 I can't remember if the Cruise-Liner's "bullet" lamps had a flat bottom or not. I already bought a set of KD-516 (or so) from Truck-Lite to install on the R and also another set without the short light for MH. But Cruiseliners had something different from the factory. If you look at the pics and also the brochure photo of green cab you posted above those lights have mounting area at the front only and the most of their body length is "flying in the air". I don't remember seeing such ones for sale or installed on other trucks. My new purchase has marker lights which look as Kenworth W900 fender turn light and I noted similar setup on other Cruiseliners. But those "flying torpedo's" are definitely a special and attractive thing. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment Share on other sites More sharing options...
kscarbel2 Posted July 24, 2020 Share Posted July 24, 2020 20 minutes ago, Vladislav said: I already bought a set of KD-516 (or so) from Truck-Lite to install on the R and also another set without the short light for MH. But Cruiseliners had something different from the factory. If you look at the pics and also the brochure photo of green cab you posted above those lights have mounting area at the front only and the most of their body length is "flying in the air". I don't remember seeing such ones for sale or installed on other trucks. My new purchase has marker lights which look as Kenworth W900 fender turn light and I noted similar setup on other Cruiseliners. But those "flying torpedo's" are definitely a special and attractive thing. You're right Vlad....my mistake. Those were supplied by KD, who was acquired by ATC. I understand and agree. I still think they were KD though. https://www.slclighting.com/shop?Collection=Cab Markers https://www.slclighting.com/product-page/c-m-bullet-chrome-amber-incondesant-long-body 1 Quote Link to comment Share on other sites More sharing options...
BOB DINGSDALE Posted July 24, 2020 Share Posted July 24, 2020 International TRANSTAR's COE's & the 4200 and 4300 conventionals used lights similar to those on the CRUISELINERS .Nice looking country . Thanks for sharing.Differant view from what politictions show and tell. 2 Quote Link to comment Share on other sites More sharing options...
Maxidyne Posted July 24, 2020 Share Posted July 24, 2020 Looking at the cab colors, might this Cruiseliner have been built for Haliburton? Quote Link to comment Share on other sites More sharing options...
kscarbel2 Posted July 25, 2020 Share Posted July 25, 2020 23 minutes ago, Maxidyne said: Looking at the cab colors, might this Cruiseliner have been built for Haliburton? This 8x4 twin-steer also has the short 76-inch sleeper cab. . 2 Quote Link to comment Share on other sites More sharing options...
Hayseed Posted July 25, 2020 Share Posted July 25, 2020 12 hours ago, steve s. said: hopefully the rest of the cab is good and solid. Those Riveted (Or I should say Huck Bolted) Cabs, never stood up to Our Road Conditions very Well...!! Every one I've ever Seen all the Rivets around the Grill holding the engine Tunnel in. Were ALL either Loose & sloppy or had being repaired.. 1 Quote "Be who you are and say what you feel...Because those that matter...don't mind...And those that mind....don't matter." - Link to comment Share on other sites More sharing options...
kscarbel2 Posted July 25, 2020 Share Posted July 25, 2020 23 minutes ago, Hayseed said: Those Riveted (Or I should say Huck Bolted) Cabs, never stood up to Our Road Conditions very Well...!! Every one I've ever Seen all the Rivets around the Grill holding the engine Tunnel in. Were ALL either Loose & sloppy or had being repaired.. Which is why to this day I remember the part number for the grille mounting nutzerts........68RU29301P5 (note that's a 5-digit [29301] Mack Western style part number) 2 Quote Link to comment Share on other sites More sharing options...
Popular Post Mike Harbison Posted July 25, 2020 Popular Post Share Posted July 25, 2020 Looks like a sister to mine,sounds like the same specs too,1078 main,1241 Spicer auxiliary, heavy frame. 4 Quote Link to comment Share on other sites More sharing options...
Vladislav Posted July 25, 2020 Author Share Posted July 25, 2020 2 hours ago, Mike Harbison said: Looks like a sister to mine,sounds like the same specs too,1078 main,1241 Spicer auxiliary, heavy frame. Yup, pretty sure. Also square fuel tanks and the air tanks removed from under the battery boxes and installed on brackets to the chassis. Plenty of minor similarities too. 1 Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment Share on other sites More sharing options...
Vladislav Posted July 25, 2020 Author Share Posted July 25, 2020 7 hours ago, Hayseed said: Those Riveted (Or I should say Huck Bolted) Cabs, never stood up to Our Road Conditions very Well...!! Every one I've ever Seen all the Rivets around the Grill holding the engine Tunnel in. Were ALL either Loose & sloppy or had being repaired.. Same here. Both for roads and the rivets 1 Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment Share on other sites More sharing options...
MHfred Posted July 25, 2020 Share Posted July 25, 2020 Vlad, thanks very much for taking the time to type your story and post pictures. Very interesting and beautiful country. 1 Quote Link to comment Share on other sites More sharing options...
ws721 Posted July 25, 2020 Share Posted July 25, 2020 (edited) On 7/24/2020 at 9:38 AM, kscarbel2 said: From the 1982 second generation (Macungie production) Cruise-Liner brochure, this is my favorite photograph. Sharp looking truck standing tall. Would like to find that bumper in new condition for my WS . Now if your going to promote your truck at least put Alum wheels on it Edited July 25, 2020 by ws721 2 Quote Remember if it's got a hood it's no good! Link to comment Share on other sites More sharing options...
mowerman Posted July 26, 2020 Share Posted July 26, 2020 wow,,,,cool photos,,,,thanks for sharing,,,,,love the rig man.....i hadda 83,,,years ago,350 thermodyne,,9 speed fuller.....,,bob Quote Link to comment Share on other sites More sharing options...
Mike Harbison Posted July 27, 2020 Share Posted July 27, 2020 On 7/25/2020 at 2:57 AM, Vladislav said: Yup, pretty sure. Also square fuel tanks and the air tanks removed from under the battery boxes and installed on brackets to the chassis. Plenty of minor similarities too. What's the last 4 numbers of the VIN? Mine is 1022. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.