Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,367

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    That is a whole lot of injector pulling to test all six cold then hot. terry
  2. terry
    just the reason i have always done my own oil changes! terry
  3. terry
    I'll bet it is something so simple, just being overlooked! terry maybe this has been mentioned, something in the tank plugging pickup at different times?
  4. terry
    If them hoses are real old they definitly can come apart on the inside. terry
  5. terry
    If you have a front mounted inter cooler, take it off and clean everything real good, back of intercooler, and front of radiator. Terry
  6. terry
    Is the threaded part the filter screws to, crooked in relation to the filter sealing surface? terry
  7. terry
    You can cut a shim out of a beer or pop can to tighten up that u joint cap, if the rest of the u joint is ok. Terry
  8. terry
    I have seen plenty of 18 speed fullers behind 460 mack engines, should be a piece of cake behind a 285. terry
  9. terry
    Maybe manders will give you a good deal on a 676 engine, they are 285 horse, have to have a different air filter and different intake and maybe exhaust piping. Terry
  10. terry
    Have you contacted Manders to see what they can do for you? I would speak to the owners. I have bought from them before and had real good luck. terry
  11. terry
    Nice to hear when help here helped! terry
  12. terry
    For awhile on the mack camel back they had three lengths on the springs, i'm thinking 50.55, and 60inches. terry
  13. terry
    Looks to be some sort of hendrickson suspension and rears. terry
  14. terry
    the knobs slide off the lever, just stuck on. terry
  15. terry
    Sure no expert on this trans, sounds like a o ring blown on reverse shift rail, i'm sure somebody more knowledgable on these will comment. terry
  16. terry
    I had paper work on that B421 from new and it had the flathead. terry
  17. terry
    B421 was a flathead gasser, very gutless! Terry
  18. terry
    I've often wonered this , i had a B421 dump truck for a couple of years, long time ago, my first dump truck, lots of shifting with that baby quad! terry
  19. terry
    generally to get it cleaned right between radiator and C.A.C. to pull cooler out and clean it and radiator real good. terry
  20. terry
    Don't look in too bad of shape in the pic! terry
  21. terry
    I joined the army jan. of '67' army engineers crane operater, first year in ft. carson colo, second year in germany and "69" in viet nam. got out dec 25 of "69" terry
  22. terry
    Have the top limit of RPM's set to 2000. terry
  23. terry
    nice to hear back when a problem was solved! terry
  24. terry
    what a way to make a camshaft!! terry
  25. terry
    if you look close on the engine data tag, it says engine exhaust emission control information , don't think they worried about emissions back then, probably a replaced engine ? terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...