terry
-
Posts
2,213 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by terry
-
now thats a working shop!! terry
-
Are you sure it wasn't fixed right the first time, the weld sure looks good from the photo. terry
-
Isn't that between inner and outer wheel bearing? If weld looks good run it, terry
-
But with the exhaust valve closed, would that seal up the seat?
-
Exhaust valve seat loose?
-
So would be a gasser or diesel? terry
-
Mack t1070 12 speed perfect for that engine, just have to shorten the driveshaft.
-
Thats quite the spanner wrench! terry
-
if you hear a boost leak, you probably have found your problem! terry
-
That style you take backing plate off, take cotter pin out of bottom, then there is a cross slot on botton, screw that out, the top is pressed in, pop that out and knock pin out to the bottom , once you break the taper loose it will fall out, alot of the replacements are nylon bushings.
-
new old macks
terry replied to Mean Green's topic in Antique and Classic Mack Trucks General Discussion
Make some nice trucks out of them! Terry -
I second what MACKs says about the trunnion bushings, if it is bronze and really walking out, trunnion tube is probably gone too! terry
-
What exactly is this?!
terry replied to doubleclutchinweasel's topic in Antique and Classic Mack Trucks General Discussion
probably a misprint on the 300 series? need to know the seriel # off the frame, that will tell you alot. looks like a older thermodyne engine that somebody put screw on oil filters, doesn't have a oil cooler. probably a triplex or quad transmission. terry -
Should give you alot of trouble free miles for a long time! Alot better than them emission plagued engines along side of the road! terry
-
Depends if your pump is separate from control valve or built together, if hoist is staying up and not leaking at the packing on each stage your good to go!
-
Every dump box i have ever seen is pressure up and gravity down, no two way cylinders on dump truck boxes i have seen, two way cylinder on side dumps and ram eject trailers, and maybe some other applications. terry
-
the days of laying a part on the counter and parts man going back to get are gone! terry
-
That post is seven years old, more than likely gone !
-
Very nice F model! terry
-
Should have found another 12 speed or fixed that one, best trans mack ever built! terry i know this doesn't help with your problem, i just had say it!
-
Maybe post it with pics and info, with a price in the for sale section. Terry
-
does it have a rubber or bronze trunnion bushing? if it has the bronze one and needs replaced, might also need the trunnion itself. terry
-
Quite the rig!! terry
-
That phrase "needs work" can be pretty much wide open!! terry
-
love them 12 speeds! terry
BMT Forum Logo
