Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,217

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    That is a different looking intake manifold. terry
  2. terry
    Nice looking ride!! terry
  3. terry
    That will let it lose it's prime. terry
  4. terry
    Never realized the 8V71 was such a small cubic inch engine. terry
  5. terry
    Maybe them bulldogs were glued on? terry
  6. terry
    you can always bolt some sheet steel to the floor. terry
  7. terry

    67 F

    terry replied to storkmack's topic in Trucks for Sale

    looks to be in real rust free shape from the photos. terry
  8. terry
    That under slung rear suspension is not a good set up, would not use it for a working truck. terry
  9. terry
    could be a nightmare, if the 06 is a electronic engine the 03 might not have the harnesses or computer for the later engine. terry
  10. terry
    Keeps dirt from going into the brake can. terry
  11. terry

    67 F

    terry replied to storkmack's topic in Trucks for Sale

    Got a location on the auction? terry
  12. terry
    Quite the selection of old iron, were the mercury branded p/u's made in canada? terry
  13. terry
    That yellow D model mack is a rare one! terry
  14. terry
    Has there been a change with tires? terry
  15. terry
    you might have something there, my blood is O+ terry
  16. terry
    Good luck on your recovery. me and my wife both had it last oct. but had no symptoms at all, not even a fever. terry
  17. terry
    Just because it has a 18 spd. don't mean you have to use all of them, i drove a side dump with a 18 spd. most of the time i could use the low range like a 5 spd. then use the splitter on the high range when needed. just nice to have the low range splits when you need them. terry
  18. terry

    Midliner

    terry replied to Rick01's question in Mack Truck Q & A

    much better pick.👍 terry
  19. terry
    I'm sure they are a hardened surface after, a bunch of miles the hardened part flakes off, just like wheel bearings will do. terry
  20. terry
    Thats what happens with them right hand drive trucks!!😂 terry
  21. terry
    Pretty straight truck for the year, could give alot of trouble free years over these new emission plagued engines. terry
  22. terry
    Only thing that makes it worse is when you bolt compressor in and notice the oil feed tube on the bench!! terry
  23. terry
    I have messed with quads and triplexes for alot of years, that is where i always found them, either behind the fill plug or right above behind the mack stamping, wire brush it real good, might be a light stamping, there will be a 11KBA number with a TRQor TRT 72 or 7220 also a 7210 version, no 0 on the end is a direct in fron box and overdrive in back, a 0 on the back is overdrive in both boxes. terry
  24. terry
    Right behind fill plug, should a flat spot with the stampings there. rub hard with a wire brush. terry
  25. terry
    So can you say what it cost you? terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...