Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,431

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    On them 12 speeds there was a overdrive, which most are, had a direct and overdrive on the split, but some of the early ones were a direct, which was a underdrive and direct on the split.
  2. terry
    As far as i am concerned that 1070B 12 spd, was the best trans mack ever built. terry and that X107 and 2070 takes a whole different ration to work right.
  3. terry

    75 r686

    terry replied to Bluebulldog's topic in Trucks for Sale

    good money for a "75" terry
  4. terry
    piece of gasket material and a small pall pien hammer and tap lightly on the edges! will punch it right out. terry
  5. terry
    Could the s mean single reduction? terry
  6. terry
    Nice to have a update! terry
  7. terry
    manders diesel repair,lakeville minn. real good people to deal with. terry
  8. terry
    Are they even available? probably be backordered and take six months to get! terry
  9. terry
    When this guys do a restoration they should paint the interior the right color. terry
  10. terry
    That is where a B model steering box is. terry
  11. terry
    The same model of truck.
  12. terry
    Oh yeah they were made, went and sat in one today! terry
  13. terry
    i posted in the wanted section, but thought there is more traffic here, looking for a D42 emblem, or somebody you know that might have one, yes very hard to find! terry
  14. terry

    D42 emblem

    terry posted a topic in Parts Wanted

    Looking for a D42 emblem, i know it's a rare one! terry or somebody that might have one.
  15. terry
    the upper one is a later set up, don't know exactly the cut off year when they went with it, as far as gas engines i have seen them with external air cleaner on the overhead engines and a oil bath one on top of the carburetor on the flathead engines. terry
  16. terry
    This is the real early six speed, the front box was a basic 5 speed with reverse, and the back box was a low and direct to use with the 4.17 rears, and the the overdrive had a direct and a wide overdrive to use with the slower rears that were used with the tri and quads transmissions. terry
  17. terry
    I think that draggon wagon that posted up above is that Tom, terry
  18. terry
    Looking for a tractor or dump, single or tandem axle? need to be a little more specific.😄 terry
  19. terry

    Floor pan

    terry replied to Rick01's question in Mack Truck Q & A

    most floor pans are bolted in, some even around foot valve, depends what model he is talking about. terry
  20. terry
    That .68 overdrive trans is a 2060,2070 or 2080 series transmission, too much overdrive for 4.17 rears, the 2090 would be a real good trans for you. terry
  21. terry
    Are you sure you are getting the numbers off the transmission case correct? A X107 is a direct transmission. with 4.17's it will top out about 60MPH. depending on your top RPM's. terry
  22. terry
    I believe them spacers were only used on the steel caps, they probably would chew up an aluminum cap. terry
  23. terry
    How much for labor ?
  24. terry
    thanks for that info. terry
  25. terry
    I have a set of six of cummins reman injectors says PTD injector part number 3018840PX, if anybody can figure out what these are for? would sell them real reasonable if you can use them. terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...