terry
-
Posts
2,466 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by terry
-
Yeah that’s older style 12 spd. A real massive transmission. Terry I personally love that transmission!
-
I ran into this on a 72 el camino, pulled the engine thought the bearings were std, reassembled and a small knock when warmed up, come to find out G.M. would grind a crank to a odd undersize, and make a matching bearing to save a crank with a real slight flaw. terry
-
That could run a lot of trouble free miles for a guy! Terry
-
Maybe was changed by a previous owner, trying to give it a little more power? terry
-
Rear diff housing round tube, not square
terry replied to SpreadingLime's topic in Driveline and Suspension
Round ones were early housings, don't know the exact year they went with the square housings. terry -
I’m thinking no the bronze bushing spindle I believe is threaded on the end and I don’t know if the 44K rubber bushing has any threads. Terry
-
Is it a camel back suspension? Terry
-
Can you post some pics. Of the 44 cutoff? Terry
-
Got lucky! Terry
-
And probably work circles around all these emission choked junkers! terry
-
I know its aways away but manders in lakeville minnesota parts out alot of older and newer mack trucks. terry
-
air shift pto
terry replied to pmolitor's topic in Antique and Classic Mack Trucks General Discussion
Any six speed I have driven always had the main box in 3rd, 4th, or 5th gear, depends on your needed PTO speed. Terry -
Don't know about thread locker on the rod bolts, but on head bolts be sure to run a bottom tap in head bolt holes, and blow out with air, and a die on headbolt threads and , oil threads and washers as you said. terry
-
It's terrible how all this newer stuff is a POS!
-
Might need a little heat or as I call the blue wrench! Terry
-
I think a G733 was originaly a cummins engine with a turbo. terry
-
Learn something new every day! Guess i just never heard it called that. terry
-
What are you referring to when you say pinion gear in a transmission? Maybe I’m missing something? Terry
-
I know it’s your transmission but with .002 endplay I would call it good, the only place I have set gear backlash is on PTO’s, different gasket thickness’s, there is no way to set backlash between main and countershaft gears. Terry
-
It is definitly set on the rear of back countershaft. terry
-
237 hp engine. Terry
-
Also run a die on both ends of studs, and a bottom tap down block stud holes. Terry
-
But when you preload does that take all your end play away? Yeah them figures for new and used bearings are right on, I never used the string and scale, I used the dial indicator, don’t remember how many thousands though. Terry
-
Joey I looked in one of my old Mack manuals it says on reassembly leave top main shaft out of back box bolt cases together and wrap string around counter shaft and set at so many pounds pull, I never done that to much crap! I used the dial indicator after assembled and set at so many thousands but I don’t remember the exact number. Terry
-
Yeah rear box will work to, some don’t have PTO openings, the rear bearing on rear countershaft is held in by a tapered bearing towards the front, the rear cover and shims press on the bearing outer race to set endplay. Hope I’m explaining this so you understand? Terry no snap rings
BMT Forum Logo
