Jump to content

Brian L Blaylock

Bulldog
  • Posts

    207
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Brian L Blaylock

  1. While you are replacing the air lines I would change the air filter on the back of the transmission this seems to be an item that is often neglected
  2. You might have better luck finding a key and take it and your switch to a locksmith and change the switch to match the key
  3. The last time I went to the doctor with a gout flare up he recommended drinking tart cherry juice to help as a preventative
  4. Hey Mike good luck with your surgery I hope it’s very successful
  5. Someone else please correct me if I’m wrong I think that a 11-24.5 tire with the correct rim will work in place of the 11:00 22 but will not be quite as wide across the tread
  6. I don’t know where your starting point or destination is but if you decide to drive it and run into a problem there is someone on this site who is close enough to lend a hand or can advise you who can
  7. My dad had a 1977 R-700 that was a glider kit I don’t remember any of the model or vin numbers but the door tag actually had glider kit stamped on it
  8. Yes I’m almost positive that is a Glider kit
  9. The two most common name that I have ever heard for them is either Dayton wheels or spoke wheels
  10. Hey FWD with 111 feet of ladder does this truck have one or two sets of outriggers
  11. I don’t have any knowledge of medium duty trucks but if it would happen to have an air accelerator as did some Superliner you might check there
  12. Does your truck have fuel heaters in the fuel tanks if so you could be getting coolant from one of them if it is cracked
  13. I finally got around to putting the heat shields on the old dog
  14. Sounds like you have a plan let me know how it works
  15. I think I saw on one of the Facebook pages 117,500.00
  16. Is this truck not equipped with a poor boy cruise control already aka throttle lock cable?
  17. Congratulations Rowdy I’m glad to hear this great news and that all are doing well
  18. This one recently followed me home
  19. Just catching some rays on this sunny Sunday afternoon
  20. No firewall modification on mine built new exhaust manifold sections and relocated turbo up and away from firewall I have a little trouble with air intake tube I built a bracket and used the oil filter mount for the 865 and mounted it on the frame behind the cab on driver side and connected with hoses
  21. I have a B-615 that has a ENDT-865 in it was installed by the Brian Blaylock shade tree modification and skinned knuckles engineering shop
×
×
  • Create New...