Jump to content

Brian L Blaylock

Bulldog
 View Profile  See their activity

  • Posts

    207

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Brian L Blaylock

  1. Brian L Blaylock
    Like skydawg stated a surface grinder would probably work better I hadn’t thought of that
  2. Brian L Blaylock
    I realize that it would be a little bit to the extreme but if the one listed above is to thick would it be possible to tack weld it to a piece of round stock and chuck it into a lathe and turn it down and then remove the round stock and dress the welded area as needed
  3. Brian L Blaylock
    What kind of truck
  4. Brian L Blaylock
    The number is on the side of the frame according to your first picture you need to keep cleaning towards the front of the truck some more
  5. Brian L Blaylock
    Yes on the 865 and 866 the top of the valve covers are flat and do not have the vent tubes
  6. Brian L Blaylock
    That engine is an ENDT-864
  7. Brian L Blaylock
    Thanks for the replies
  8. Brian L Blaylock
    can someone tell me if the gold bulldogs color was some kind of plating or were they painted gold thanks in advance
  9. Brian L Blaylock
    Hey Mr Brandt I live about 185 miles southwest of Indy if you make the trip east and our schedules match up I could still be interested in the 12 speed you can call me at +18123055132 thanks Brian
  10. Brian L Blaylock
    Hey BOBWhite the first numbers on a truck with the endt-865 was RS-795 and the trucks with the endt-866 was RS-797
  11. Brian L Blaylock
    I have a good TRD-67 that I would sell
  12. Brian L Blaylock
    Can anyone tell me if there was more than one hood for the US made Titan thanks
  13. Brian L Blaylock
    Hey all I’m hoping someone can help me out I’m trying to find a complete hood for a 2011 Titan I’m also looking for the panel that allows access to the air cleaner on the drivers side thanks
  14. Brian L Blaylock
    Can anyone give me some advice on the most likely place where the fuel system on my endt-865 is losing prime thanks in advance
  15. Brian L Blaylock
    Here’s a picture of Dan Thomas’s Valueliner at the 2018 ATHS show in Lexington Ky
  16. Brian L Blaylock
    We need pictures of the B-77 please
  17. Brian L Blaylock
    Happy Birthday Barry
  18. Brian L Blaylock
    If you’re using 4 6 volt batteries do yourself a favor and replace all 4 of them
  19. Brian L Blaylock
    We need to see lots of pictures
  20. Brian L Blaylock
    Hey everyone I need some help I have a ENDT-865 that will not start but will hit on ether I have not had time to check it out in detail I’m going to change the filters and check all of the lines other than that or a bad supply pump what else could be wrong thanks
  21. Brian L Blaylock
    It looks to me like the only thing that the extra frame does is provide a place for the ramps behind the fifth wheel and to mount the tail lights and mud flaps the boogie is all still bolted to the original frame
  22. Brian L Blaylock
    I don’t know about the gas powered trucks but the diesel powered trucks were 24 volt starters with the rest of the truck being 12 volts and positive ground
  23. Brian L Blaylock
    Mack used 3 different shades of beige paint over the years light medium and dark
  24. Brian L Blaylock
    Rowdy sorry to hear about the passing of your grandmother as far as inconsiderate people unfortunately they are everywhere not just in the cities I live in a very rural area and back in 1998 when my dad died an asshole farmer in his semi ran me off of the road while in my dad’s funeral procession out in the country over four miles from the nearest town
  25. Brian L Blaylock
    It’s more than likely a endt-866 with a 12 speed but it could possibly be a endt-865 with a air shift 6 speed the engine number will be stamped on the block as described in a previous comment if it is a factory endt-866 the truck vin will start out as R-797 a truck with the endt-866 will be R-795

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...