Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,535

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    very trouble free set up, but not a good transmission for a pup, to wide of gear ratios. but they were used for alot of years. terry
  2. terry
    Yeah that should be fine for a ground to the frame. also need a good ground from frame to cab. terry
  3. terry
    Very good patchwork on the floor, will look real good with some paint on them. your doing some real nice work there. 👍 terry
  4. terry
    can give you some problems without that ground terry
  5. terry
    That is going to be to nice to put on the road!! 👍 terry
  6. terry

    20K front axle

    terry replied to ws721's topic in Parts for Sale

    Can't open any of the pics, wants you to open a google account. terry
  7. terry
    But you also have figure out how to have the hood float above the cowl, so hood and cowl don't rub each other. terry
  8. terry
    The three filters is a ESI engine, has a deeper pan and more oil capacity for extended oil changes. a rs600l could be an aluminum frame, also has light weight components such as spring hangers and other aluminum components. terry
  9. terry
    Wonder what springs if not camel back? terry
  10. terry
    I would trust an older well maintained truck before these newer ones with all the emission junk. terry
  11. terry
    Awsum looking truck! 👍 terry
  12. terry
    You might have a set of bearings and oil pump put in it, and run the balls off it!!
  13. terry
    Says you have to log on to see, your other pics you don't have to. terry
  14. terry
    For a guess, i would say yes. terry
  15. terry
    Normal for a DM model. terry
  16. terry
    if the spring width is the same then measure u bolt hole to u bolt hole from side to side , if they are the same on each truck, it should work. terry
  17. terry
    Wow now that is a wrecker!! 👍 terry
  18. terry
    bullet proof!! terry
  19. terry
    from what i have seen about prices there,they bring more there than here, for almost any model of truck. terry
  20. terry
    What would that autocar be worth in australia ? terry
  21. terry

    R700 MACK

    terry replied to ou812jk's topic in Trucks for Sale

    Looks wider with a slanted end to clear shifter i would say. terry
  22. terry
    What did you use to drive the seal in with? terry
  23. terry

    New Sub

    terry replied to Vmac3's topic in Introduction Forum

    You will get a work out here! terry
  24. terry
    For what you are wanting to do with this truck, you need a bigger series of transmission for sure. terry
  25. terry
    If that 83 350 was a ESI engine, they had three oil filters and a extra deep pan. lots of oil ! terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...