Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,477

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    Forget the middle seal, thats what i call it, on the old applications, put a new inner seal stemco with the grit guard seal and wear ring is what i always used, and let the gear oil lube both bearings, after you get hub on,before you put outer bearing in squirt some gear oil in hub till it starts to run out. And i used to put some grease on both wheel bearings to lube till hub fills up completely. terry
  2. terry

    12 speed

    terry replied to Old Macks's topic in Parts Wanted

    Model number will tell if it is overdrive. terry
  3. terry
    If your real careful you can put wear ring and seal in without the tools, just can't get to heavy handed or you'll bend them up. terry
  4. terry
    I used the the stemco grit guard seal and band for years, never a problem with it. terry
  5. terry
    Joey wasn.t the greased and oiled bearings just the other way around, outer was oil from end of spindle and greased was the inside bearing? terry i have ran into this on a old gas mack .
  6. terry
    Was a V8 available this early of a truck? terry
  7. terry

    12 speed

    terry replied to Old Macks's topic in Parts Wanted

    Don’t know where your at, try manders truck salvage in lakeville minn. terry
  8. terry
    Quite the collection! terry
  9. terry
    Move to above the steer axle. terry
  10. terry
    If it is a double over transmission, you go 4th hi split to 5 th high split, no splits in fifth gear. terry
  11. terry
    865 would have a turbo on it. terry
  12. terry
    Good question, I’ve wondered the same thing. terry
  13. terry
    It’s been a struggle, but it will be worth it! terry
  14. terry
    Once it’s all together nobody will ever see it! Good job making it. terry
  15. terry
    On a engine with the spin on filters the turbo feed comes off of top of the filter heads, and the older engines with the big full flow/bypass filter the turbo feed comes off that pad on the side of the block? terry
  16. terry
    Bet it is hard to roll a creeper on! terry
  17. terry
    Does this engine have a turbo? terry
  18. terry
    Does this block have piston cooler nozzles? Terry
  19. terry
    So what is so different with the ESI block, i thought the only difference was oil pan depth, and amount of oil filters between a two filter engine and a three filter engine. terry
  20. terry
    If all them date coded things you said are correct, i don,t think i have ever heard of a truck with so many original factory parts. terry
  21. terry
    Nice group of macks! terry
  22. terry
    4:10 rear with that overdrive that B will really scoot, i’m gonna guess,1600 RPM should be around 65 MPH ? terry
  23. terry
    Isn’t that one of them Mary Hitchings truck out of California? terry
  24. terry
    Do you have another longer extra leaf that you could cut down? terry
  25. terry
    Yeah geoff i ran a 16 inch single disc clutch and a quad behind a 237 and had no problems for many years, but i was the only driver, and yes there was a 16 inch clutch, came off early V8’s. terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...