Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,514

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    Job to be proud of! terry
  2. terry
    Real hard to get a good old fashioned footlong chili dog with a steamed bun! terry
  3. terry
    Yeah i’ve had older mack engines run backwards, just let clutch out and kill it then do a normal start up. Terry🤐
  4. terry
    Like the far left one. terry
  5. terry

    Eagles

    terry replied to mowerman's topic in Odds and Ends

    Mahomes line couldn’t stop them! Had no time to find receivers! Terry
  6. terry
    Bottom row left, always been a sucker for red! terry
  7. terry
    Yeah them three straight leaves were pretty soft riding, but leaned real bad. terry
  8. terry
    That would probably be ok for a hobby truck, but one working every day probably not. Terry
  9. terry
    Was this a hendrickson walking beam or a mack beam, and yes mack a solid walking beam years ago. Terry
  10. terry
    Can't you use a filter that came with the tip turbine engines, it has two separate filters in one housing, one for engine and one for the tip turbine.. it is a bigger housing, but it's all on the passenger side. terry
  11. terry
    The biggest problem with a mack single countershaft trans with higher horse engines is do not lug it, keep the rpm’s in higher power band and you’ll be fine, terry
  12. terry
    Just a little warm!😂. Terry
  13. terry
    Original 4:50 rears have been regeared to 5:73 ratio. Terry
  14. terry
    Yeah long as you got one for a pattern shouldn’t be to hard. Terry
  15. terry
    I don't know where your getting the countershaft shims from, i might have some in my shop if you need them. terry
  16. terry
    I’m sure you probably know this, you have to bolt cases together to set endplay on counter shafts and shim accordingly,check at pto opening, and I believe on mainshaft output at back box takes spacers between the two facing bearings to set endplay. Terry
  17. terry
    I once had a vent pipe that had a short rubber piece between valve cover and vent pipe, the rubber collapsed inside and the engine was pushing oil out all over. Terry
  18. terry
    Guess i’m just old school and ran camel backs forever, far as i’m concerned can’t beat them with a very little maintenance. Terry
  19. terry
    What is a twin Y suspension? Terry
  20. terry
    joey are you talking shim paper or shim steel? Terry
  21. terry
    I haven’t heard from him in quite a long time either. He certainly is a ok guy! Terry
  22. terry
    That truck in my profile came from Norm Taunton in Galt, California. Terry B733
  23. terry
    You got your work cut out for you there! Hope the engine is usable. Terry
  24. terry
    Maybe that broaching was a way to cut oil grooves or dimples like original gear bushings on the old 72 series transmissions.🤷‍♀️. Terry
  25. terry
    If you google broaching a gear bushing there are some explanations of it. Terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...