terry
-
Posts
2,358 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by terry
-
Was that 2 valve 350 with the tip turbo made only a couple of years, don't remember seeing a lot of them? terry
-
Last piece of the puzzle
terry replied to 66dc75's topic in Antique and Classic Mack Trucks General Discussion
I once had a 70 DM that had them, can't give exact years they used them. terry -
Last piece of the puzzle
terry replied to 66dc75's topic in Antique and Classic Mack Trucks General Discussion
very nice looking for the age, love that engine and tranny combo. I would not touch a thing on it! terry -
wasn't that early turbo engine engine a ENDT ? terry
-
Don't forget the 711 engine, 211 HP with no turbo. I once had a B model dump with a 711 that local mack dealer put a turbo on, it was one of the best sounding engines i ever heard. Alot of people told me they could tell it was me coming by the sound of it. terry
-
Didn't know there was a C version in the nonturbo engines, learn something new everyday! terry Shows our age talking about these engines!
-
673C was a 250 hp engine, about as big as the early engines were, predecessor to the 237. terry
-
I heard on the news that it is pretty hot there right now!
-
-
They have a bunch of different maxitorque transmissions, have to have the numbers off of trans. to tell what you have. terry
-
Nice flatbed !!
-
Might be the valve above it with a different knob on it. terry
-
should be the same as a early DM,or R model. terry
-
Don't know what you are calling bull gear, generally that is a rear end gear, nothing to do with engine, sounds like you are talking about engine air compressor> terry
-
Isn't the back curved? terry
-
'77 Cruiseliner Battery Configuration
terry replied to 77_Cruiser's topic in Electrical, Electronics and Lighting
just double check how battery cables are wired to starter to figure out if it is 12 or 24 volt starter, might be able to look on starter to see voltage. terry -
Your going to have to give a little more info than that. terry
-
Nobody rebuilds parts anymore, I used to take brake cans apart and change service and emergency diaphrams. terry
-
The duplex, triplex and quad just had a reverse spirial on input shaft to push oil back, no lip seal. terry
-
Maybe a bad injector slobbering fuel? terry
-
Might be a little on low side, but I have seen these engines run this way for years and years. Nothing to get concerned about. terry
-
Mack letters for hood
terry replied to Moparmike's topic in Exterior, Cab, Accessories and Detailing
There are plastic or fiberglass ones out there, we have some on trucks at work. No idea where they came from. terry -
better than going to China! terry
-
Got your work cut out for you! Best of luck . terry
-
About a 500.00 dollar item. terry
BMT Forum Logo
