Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,358

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    That's when Mack made real trucks!!! terry
  2. terry
    has a doghouse right? terry
  3. terry
    Some older ones had different size oil pans, don't know if a 20001 has different ones. terry
  4. terry
    Not familiar with the B57 but the B53 had a beam over a three leaf spring, would stay in line real good, but would break leaves constantly. I ran one for a lot of years, always kept a spare spring in my garage. terry
  5. terry
    Air governor should have a rubber cap on one end,remove and loosen lock nut and turn screw in or out to adjust cut in and cut out setting. terry
  6. terry
    learn something new everyday!! terry
  7. terry
    Don't you have to plug other end of intake system? terry
  8. terry
    get a heat gun and compare guage readings to gun readings. terry
  9. terry
    The pin is just to the back on each shift rail, you will see with floor board out. terry
  10. terry
    Worked on a lot 237 and 285 engines all had 2. inch input shafts. terry
  11. terry
    Probably weren't geared very fast.
  12. terry
    Just wondering the same thing! terry
  13. terry

    Janitor

    terry replied to Robert Melnyk's question in Mack Truck Q & A

    A DMM is a all wheel drive, google it to get some pics. terry
  14. terry
    If you start out in 3rd. gear in a 5spd. clutches are going to be short lived! terry
  15. terry
    Looks to be a non sleeper F model, bet them ramps could get a little tricky to load on in wet weather. terry
  16. terry
    H K trucking post has the best idea, I have done that many times to the aux. linkage many times. terry
  17. terry
    Does that set-up make it feel real light on the steer axle? terry
  18. terry
    You jogged my memory with that pic, we have a 99 CH at work with the same P/D switch, definetly original. terry
  19. terry
    Some of the older switches were the same, but with a round faceplate. terry
  20. terry
    might be different switch, but would do the same thing, can you post a pic of yours? terry
  21. terry
    An original LT might have three sticks!! terry
  22. terry
    Doesn't somebody make one of these stands that come in pieces to install easier? This one sure looks heavier duty than a stock one! terry
  23. terry
    lucky gal!!!
  24. terry
    A sharp line up of classic trucks!! They will work circles around these new emission laden trucks, terry
  25. terry
    Pretty hard to offer without looking in person. Unless it was somebody you had a lot of faith in. terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...