mrsmackpaul

Its um well gunna catch your eye thats for sure then again MAN have always had a style all of there own Paul

Yep Billy I have said before how I dont think there is that difference between Australia and America we both have governments that seem hell bent on driving is into the ditch as fast as they can they seem to want us all to be on welfare and do there darndest to send us all broke and break free enterprise and the one thing in Australia the government hates more than anything else is the small self employed business man , maybe he has a tough spirit that the government cant break easily Anyway way of the topic of Ford Australia and the train wreck they are fast becoming Paul

Are you sure there isn't something floating around in the oil gallery behind the pressure sensor and getting pushed up on the gallery and reducing flow? Maybe try an old style mechanical pressure gauge a few zip ties up in to the cab and see if you are loosing oil pressure when it happens. Paul

do farmers in Europe ever use these for ploughing ??? I know the idea has been out there for a long time since WW2 you could buy after market kits for ex army Jeeps to all sorts of farm work Land Rover had all sorts of big ideas in 3PL as well but none of it has ever taken off for farm use like tractor Mercedes made 4x4 tractors for some time in the 80's that were more tractor than truck but even they sought of failed to be long lasting sellers JCB have been making the fast trac but I never really seen them getting used as tractors 70 years hey my how time flies

Im getting a fair bit of topic here but when talking fuel economy in the fuel crisis back in the 70's a lot of research was done the single biggest factor was speed once you went above 80 kmh it made a huge difference the figures from memory was something along the line of twice as much hp to travel at 100 kmh with a van type trailer flat top tarped loads were the best double stock crates were the worst 7MPG was common back then on interstate trucks or at least it was achieved in large fleets under test Talking about wheel slip on drive tyres I have noticed the only tyres that get real hot are drive tyres so I reckon there must be a fair degree of wheel slip in trucks pulling big loads and a huge amount in trucks running fast Paul

good on ya Swishy LOL

I would guess around 45 - 50 MPH average speed not many towns in a lot of Australia and no you dont need a lot of power to get moving I have 320 under the bonnet and it is rated to 115 ton from Mack and you can easily get that moving under most circumstances have had one occasion I had it jump out low 2nd climbing a hill came to halt I needed deep reduction to lift off and was wheel spinning on the bitumen but that was more waiting for the last axle group brakes to release I was fairly tightly wound at the time and if I was a tad calmer it would have lifted of fine OOP'S The biggest thing in keeping these bigger loads moving at any speed is wind head winds crook if I have the breeze coming across at a 45 degree angle across the front thats a fair bastard and I have spent the odd hour or two at 30 MPH As for higher power Timmy I think would give a much better answer than me Paul

Well give us a shout if you do make it back over and we can have a beer or two and chew the fat for a while

I would agree 100% I have stated many times on here most people dont realize how flat Australia is, it's the flattest continent on earth hence we can pull thumping big loads over a huge distance with what may seem like a small amount of power to do it with

No Tim The government know what has to be done to keep the manufacturing industry competitive and it isnt handing out bucket loads of cash they did that and it didnt work If you look back at history you can see when Australia was running at its best and the way the country was run the policies the government had in place to make that happen and it did work and work really well we had full employment almost everything was made here overseas companies would set up factories to build gear Todays world and it has been heading this way for 35 years or more the government have slowly been undermining everything Australians have worked for Our Prime ministers have stated "no one should have to work in a job they dont like for a living", "we must become the clever country", "Every person should go to university " The government has openly encouraged the importation of cheap crap at the cost of Australia jobs , they set up policies for kids leaving school were there is great shame in becoming a factory worker or tradesman heck for that matter any blue collar job The government have set Ford and Holden up to fail by handing out bucket loads of cash to on the condition they keep on building these cars people dont want anymore Had they have butted out and left the country as it was back in the early 70's none of this would have happened , the biggest catalyst for change was when the UK joined the EEC or the EU as its called today the Australian government was so desperate to find trading partners they signed away the very heart and soul of this country for a little bit of trade Has it worked ???? well we can all be a judge on that but one thing that no person can deny is the Australia of the past is a lot safer than the Australia of today and all sorts of ways We had safety in job security, safety in a economy that was booming, safety as in health and well being, safety in we could and would build everything and anything and were the world leaders in most things We have let this all go shame on us Paul

Yeah not happy Jan FFS really when will the government stop wrecking this great country of ours

yeah mate getting to stop talking is the challenge

hey does this cart make my ass look big Look at you you lazy ass just hanging about Paul

Ok got the grey matter fired up and found the other picture I was thinking of The caption that goes with this photo says the Stuart hwy NT have sent the message out as to who owned these trucks have heard replies but 100% sure answer And no it aint single drive drivers changing a flat bag on it Will let you know if I find a definate answer seeya Paul

Is there a reason Europe dont use B doubles and still use body trucks and a big dog trailer B doubles track better are flexible in use travel better at high speeds and you can drop the A and B trailer and grab a fresh set Im sure they have a reason just cant think for the life of me why Australia stopped using body trucks on road trains in the 70's and 80's for very good reasons although WA still use some Paul

heavy haulage

I asked a bloke in the know ( he does sign writing and scroll work on trucks) about removing paint with out trashing whats under neath for ya dunno if its of any interest but this was his reply anyway I got farming to do great looking jigger once again seeya Paul Paint well there isn’t much really, depending what and how long its been on there. Always a little test spot though and that isn’t guaranteed as It could well have had a panel repair at some time.; Acrylic / multi purpose thinners Oven cleaner, has to contain caustic. real hot high pressure wash Baby Oil. wet and dry sanding 2 ingredients that are essential to mix with any of the above Patience Elbow grease

I think the old Cat motors must fit into Macks ok as the first Cat diesel motors ever fitted were to Mack's

Thats a cool old truck I bet if you spoke to the right person they would tell you how to remove that paint with out trash the paint under neath I phoned the museum in Melb once asking questions about that type of thing and they were very helpful I reckon I know a bloke in Victoria not knowing were you are that could help or point you in the right direction to get it sorted What model Cat motor did the B model have looks like would have been fairly smart looking jigger Paul

thats the swag tied up high keeps it dry and drys out any dew etc I dont that is a Ballards truck pretty have seen photos of that truck or one from the same crew before will have to think of wear ??????? brain isnt 100 % today so may take a while Paul

Well I have good news and bad news bad news is it appears you have addiction to collecting some pretty cool stuff the good news your not alone If you had of put a bit more chassis rail in you maybe could have put a tilt tray on with some quick release locks and you could use it for a semi and a tilt tray, may come in handy for bringing home some treasure Paul

looks pretty sharp to me and you aint gunna loose it any time soon thats one bright colour you blokes have painted Paul

Under each rocker there is a bridging piece that push both valves on the inlet or exhaust at the same time Highly unlikely that all solenoids are crook at the same time grab a multi meter and check the coils you may have to get some emery and clean up the contact a bit to get a good test most likely the connection between the rocker cover and the head is not installed correctly or has no proper connection but test the solenoids first as that will tell the story

You know what really dags me these days is how as soon as some one says something someone else might not like people start to bitch and sook and cry fowl say we are putting them down As far as knocking the US while I dont agree with everything that goes on over there I do hold the US in fairly high regard I do often think about all the men who gave their lives to fight a fight that wasnt really theirs but they felt that it was the right thing to do very much like my own country men I also truly believe that in the US just like Australia although the all mighty dollar is important that in times of need almost all from all walks of life put that and other differences aside for the good of man The beliefs that we in Australia hold near and dear and give our lives for are similar if not almost the same as those in the US So yeah I crack the shits when some body implies Im knocking the US as believe most Americans arent that much different than most Australians What made me think of this well the Princess sent me a link to a story in the US and its a story that I have seen and been apart of in Australia before about people helping out people not for any monetary gain but because its the right thing to do now thats what makes this country great and also expect thats what makes your country great To imply Im knocking the US well when I was fertilizing my sugar cane in my US based Australianised IH tractor I got to thinking my ute is GM the Princesses wagon is GM heck the Mack US Australianised product my old Chamberlain tractor was made by John Deere Fruhauf trailers Steco float even the Federal truck the list goes even a lot of my good tools are US made heck if anyone actually pulled their head out of their ass and read what was typed they might find the US has a lot more friends than they think our troops are still fighting along side your troops and no doubt always will Back to the link it has trucks in it so I guess its ok on a truck forum hope the link works as we say in Australia " I will now get off my soap box" rant over have a good night Paul http://bonviral.com/community-rallies-together-to-help-farmer-with-terminal-cancer-reap-last-harvest/