mrsmackpaul

Loosing prime and a little bit of air is getting in and hunts until the air is pumped out ? Check the fuel return line for leaks Paul

Ebay is the place to start, ever person in America that has one of these that comes on the forum gets the same dribble about parts not been obtainable, yet if we just punch in the make model etc the parts are almost always right there on ebay Or as Joey has said, get the shoes relined and wheel cylinders re-done with a stainless steel sleeve and their will never be a problem again You will need to find a parts place were the first question asked isn't "whats the vin number" as I doubt you will get a kit over the counter, they will need to measure the bore, the people that stainless sleeve them will be able to do all of that any way And the prices have never been crazy dear type of thing if you bring them in from Europe yourself Good luck Paul

What thread, Trucking News ? Never read everything but I did read a lot of stuff when KS was contributing to it Paul

Dunno if they are or arent available What makes you think its worn out ? I had my turbine apart recently and there really didnt appear to be anything to bugger up on the valve It is spring loaded and I had just cleaned around it etc as best I could Even if they arent available I think just a normal check valve from a plumbers would work in the short bit of hose Paul

Well Im sure I'll be told Im wrong but I reckon it wasnt to fit the motor in but rather to distinguish it from a six cylinder and to let more heat out The turbo would of been extremely close to fire wall Paul

Mack trucks were a very clever design, the bodies were built in such a way that even right up to the late 90's (last of the R models) fit and fitment of panels was well camouflaged so nothing really had to line up that well to give a good appearance Looks good to me Paul

Only down side with that style hitch is it allows the tractor and trailer to put you in sticky situations before you know whats happened It puts a lot of weight a long way back, ideal for just poking around the yard but very unpredictable at speed Good luck and enjoy Paul

Gotta love that reply wiserfrombud, all we ever read about are how crappy new trucks are, I dont have one as I dont have the use, however if it was my job, day in, day out I wouldn't hesitate in buying a new Mack So Mr Wiser from Bud, do you know what Budlight actually means ? https://www.facebook.com/watch/?v=246805740254746 Hope the link works, gave me a chuckle Paul

Last I recall he was building a hotted up wagon for the new bride and I seem to recall as HarryS has mentioned he was about to start moving We arent getting any younger and he may well just be flat out like a lizard drinking And as Hayseed has already mentioned, he was posting on a regular basis up until he stopped, we maybe just reading to much into this I hope all is well for him Paul

Im not disputing the weight at all as I have never even seen one of these motors and most likely never would, I just imagined it would of been heavier given the era it was made, Macks were obviously fairly advanced even back then Learning new things every day, thank you Paul

This is were I would start, but I have no idea at all on modern motors so I cant answer to any degree apart from what I would look for on older mechanical diesels Good luck and keep us updated on the issue Paul

My Federal had a back drop manifold, well still does but it was a HB Cummins so the heads are different as it isnt a cross flow Anyway great work your doing Paul

Im guessing this last one will keep the cab cooler but maybe need a heat shield for the starter motor, or maybe not. All quite impressive to me

I think its either 5.85 or 5.65 is lowest ratio for these Rockwell took over Timkens qxle division and continued to make these but as a 6 rod I have been told that the centers are interchangeable, I have two center's to replace the 10.22s in my Federal I'll find out when I try to change them if they are Paul

I guess a lot depends on what and wear you haul ? Paul

Looking at the second photo it looks like your chassis has been joined so I very much doubt thats original Paul

I think they fitted these to some western Macks, dunno about parts but I feel they arent that common and certainly not in Australia Paul

I believe that to be correct as well The whole show was a bit of a mess as a result Paul

Welcome to the forum Paul

Timken 8 rod 55,000 pound

Friegthliner certainly looks differnt than the before photo Car looks like Dame Edna wearing and her glasses, google it, you'll see whqt I mean All exciting now as things go back together Thanks for update Paul

I have ridden around in the 871 when they shifted gear for me 30 years ago The tipper was always zooming about have been up close and personal with it plenty of times I have seen photos of both of these on the internet so with some time and searching I could probably track them down Paul

A fella by the name of Trevor Ralls from Trafalgar Victoria Australia had a B61 tipper with a 671 and a B something with the aluminium cast radiator with a 871 on float work Both fitted with standard bonnets and both still had the quad box Paul