blackdog2

The Hienze family has a nice air conditioned slip in Florida for their 75' plus dingy with over 50 plus people to maintain it that was 25 years ago

Multi-tasking loss of safety bonus My garage door use to open in the middle of the night Quick fix block wall up.

I just bought one for a 12-speed new in the box .

I was standing there when he was getting the plastic ties off to open the tarp ol'well no pic from me.

Pusher Usually it has a dip in the axle for drive shaft clearance tag is tagging along like back in the day 50's 60' but pushers go both way's.

Yup a large o- ring big job they get hard and flat and leak. does your air system have a lot oil in it and leak out through the air leak

HAM & CHEEZEL I work for a mason once in awhile he told the other kid he needed ham & chizel he went and got him a sangwitch.He said what is this ham & cheese sandwich

The nut behind the whee l!!! irregular tire wear front rear that is a long long list

Never had one of those in my tackle box 11/8 wrench and a two way been doing that way since 1987 ol,'well cant change a old dog.There was a update on the adjusters for the bridges.

Connecticut 76500 with permit in certain areas other places 73000 non construction material -salt - sand for glass-scrap iron-lumber- liquid 67400 lbs on a tri axle and they check tire capacity and width and they catch you in the bad zone with non construction mat they will fine you 5k-8k 95 south West haven Conn and down to NYC line.

They all have extensions on the tube for drbbling

The same use a screwdriver !!!

Hog ring pliers & cushion kit a little over 100.00 bucks if you could find a parts guy that could order one.Very cheap way to go

Plugged air filter! engine will pull air through air compressor if worn to survive.

My 1956 B-80-81 no rust on frame at all never been painted !!!! better quality metal no recycled sh&t and better Quality Control but the new trucks has to fail.

This is the reason I find a old older Mack in good shape I buy it then figure what to do with it just bought a77- DM-685 with 283 hp 6- speed no air lines cab in perfect shape and frame frog leg new rear springs new tires all the way around and we are painting the cab & nose this wknd so we can put another 500K with no warranty problemo you brake you fix and we bought a 77-R685 in perfect shape just needs paint on the out side . Back in late 80s we sent a tractor for crack block by dip stick and front rear end housing had been leaking over two months it took them to decide whether or not to change at the time we where thinking at buying another 50+ tractors then somebody woke up needles to say we started to do are own work we did buy the CH-613 s radiators- fuel linkage -ring & pinions -air compressors - paint -minor a few problemo's

There is a museum in Danbury Conn. that has the largest private collection of every thing tanks trucks not far away from NYC

Just bought a input shaft for a 6-speed from PAI 196.00 verse mack 1200.00-1400.00 same Mack dealer different sales person I wish I could gouge my costumers. PAI dealers have parts in Mack packages or NOS ?

The DM-400's Gulf ran had a 673-non turbo, Clark tran's to keep under 45 mph- 44 rears no ignition switch 20ft delivery hose 6-500 gal compartments steel tank been on several chassis steel nose and a trip switch on drive shaft we spiffed up a couple them in CONN. what a test drive

Put air1/8" toggle on line between parking brake valve and anaroy on manifold mount inside ash tray they are getting smarter just in case you get the urge to turn it on if the man says boy you tinker with that .

I had the same problem with 01 RD change radiator & fan clutch all set new radiator lasted 1 year started leaking f*%cking new junk park it bought a 1977 DM-685 with a 285 HP smiling always to the bank $$$$$$$$$$$$$$$$$ perfect cab body frame and new virgin tires just needs paint body done with grey and installed with 4 " roller and spray the cab red & white all wheels painted grey hubs black total investment 13.5- K and a big smile.

B.A.C had 1-ten wheeler and three tri-axles Scanias now just 10 wheeler and flat bed tri axle the Superliner tri-axel was sold to local foundation guy he painted red and took off lift axle. They still have one Superliner tractor for a yard tractor in good shape has a blown rear end now for a couple years. Roger Chapman past away several months ago his son took over but not the same what Im told by employees they landed a big job by the Bass pro shop in Bridgeport CT where they are using there 70's DM-600 steel nose quad box winch tractor on site moving piling they only have one driver but pay for two.

A-lot of oil company's used them due to the light weight without the walking beams and had several bad accidents Amoco Sunoco Gulf I had one kept it on box doing T-B-A would cost a lot to change it out

Charge all 4 separately then load test to find the bad one or brake down and buy two new ones and that's all after 10years you got your money and then some . So flavor Flave taking over!!!!!!!!!