Jump to content

terry

Pedigreed Bulldog
  • Posts

    2,367
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by terry

  1. 4.17's will give all the top end you will ever need !
  2. I would have to say it is a single direction PTO
  3. Believe that is a EHU. Not a AB. Wonder what the hard to get parts consist of ?
  4. That setup is bullet proof to the new trucks!
  5. Looks like a first class line up!
  6. What Blackdog2 said.
  7. Look at that long hood!
  8. You don't hardly see any in the US except at a cat dealer.
  9. I believe the lanova diesel was also available. Terry
  10. Looks like mack sheetmetal, has to be a real rare one! Would like to know what model.
  11. That is scary!
  12. A very good job you are doing to that engine!
  13. The 12 spd can be hooked up to a 237, but it sure would be nice to have at least a 285 horse engine. Terry
  14. That probably was a 2060 series trans. Very wide gearing, was not a popular trans. Terry
  15. I believe the axle spacing are 50,55,and 60 inches. Terry
  16. Is there a regulator for the trans air supply, Cuts the working pressure down to about 60 pounds. terry
  17. If you repower with a diesel and especially a direct trans. the rear ratio has to be changed. terry
  18. You talk about gutless, I drove a B421 dump truck In the early 70's, with a quad, constantly shifting all day! Terry
  19. Very nice looking truck!
  20. Was with the Army engineers, 553 rd float bridge co. terry
  21. Perfect lifestyle ! !
  22. Now that is a crane! A far cry from the 20 ton american I ran in Viet nam in 69, had a 3/4 yd clam bucket! Terry
  23. If you are familar with the old mack five speed trans. You can shift it like a five speed when your empty, or split any of the five main speeds anytime. The low low has a lockout so it can be used with the main box in first gear only. and you might have to do a little hole modifications, just don't remembeer for sure, I put one in a DM dump years ago with 4.17 rears and just loved it! Terry
×
×
  • Create New...