Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,352

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    That trans and rear ratio should work good, but have absolutley no experience with that suspension, i'am sure somebody will comment on it here. terry
  2. terry
    Was it making this noise before the oil change? terry it would be a good idea to put the correct oil in it! I believe the 50 weight syn. was for the fuller trans. A lot of viscosity difference between them two oils.
  3. terry
    If there are two allen head screws, unscrew these and should pop out, they have a little curved piece on each one that clamps the heater down to the block when you screw them down.
  4. terry
    Hows norm doing/ bought a B733 from him some years ago, a real terrific guy.
  5. terry
    If you look on his very first post it says the truck is sold.
  6. terry
    Now that is a hood! terry
  7. terry
    I have only seen that seven speed trans used with 300 engines. terry
  8. terry
    Yeah i once had a DM dump with a 285 that would turn 2300 RPM'S, with the 1070 12 spd, and 4.17 rears, it would bury the 80 MPH speedometer. terry
  9. terry
    If that is an overdrive 12 spd. with them 4.17's it will be a runner!! terry
  10. terry
    are you working this truck with the front end in that bad of shape? sounds like your are! terry
  11. terry
    i have seen trucks with a 38.000 pound housing on one axle and a 44.000 pound housing on the other axle. terry
  12. terry

    Rog

    terry replied to Rog's topic in Parts for Sale

    Need a little more info, year model of truck? terry
  13. terry
    A five speed is not made for off road, unless you got some deep rear ends! terry
  14. terry
    Some of the early mack wheel bearings had a inner seal to separate inner and outer bearings, the inner was packed with grease and the outer run in gear oil. most guys just knocked out the inner seal and run oil in both bearings. terry
  15. terry
    Can,t say for sure, but the older 12 spd had a regulator that cut the trans working pressure down to about 60 or 65 pounds. terry
  16. terry
    Thats pretty unusual, have you tried tried tightening bolts that hold the cases together? terry
  17. terry
    Where are they leaking oil from? terry
  18. terry
    Do you have the right gasket under the filter stand where it bolts to lower left side of the block? terry
  19. terry
    What happens on a road like that when you meet another load coming at you? terry
  20. terry
    I am not to sure but i think some of the early hard nosed macks had shutters on the back side of the radiator. terry
  21. terry
    Need just a tad more info! terry
  22. terry
    Another demise of the shutters was the inter cooler in front of the radiator. terry
  23. terry

    ‘69 R600

    terry replied to kansasflyer's question in Mack Truck Q & A

    That mack should do you well! terry
  24. terry
    The 72 is probably a 237, depends if it has a quad or six speed transmission. terry
  25. terry
    Wasn't there a V8 in some of them. terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...