Jump to content

1965

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    1,130

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Everything posted by 1965

  1. 1965
    Really, worked on a many of them back in the day, never heard that before. Can you explain? Very curious.
  2. 1965
    Idk if they still make it but those fittings are reusable. That hose looks like aeroquip single wire braid (what we called it back in 90’s) on the screw on fittings, and the other we called push-lock by aeroquip. Just cut the hose off barbs. The others unscrew, the part that screws on hose is backwards thread if I remember correctly
  3. 1965
    I just knew you were going to have a new anthem, that trucks looks great compared to them!
  4. 1965
    Definitely wouldn’t hurt to have oil analysis done
  5. 1965
    Before I’d go to the trouble & expenses of cam bearings, I’d probably try to shim up regulator & relief valves to try to get more psi. If (I) was going to do cam bearings, I’d pull engine & polish crank & have tolerance checked.
  6. 1965
    Original post says mains turned and rods standard
  7. 1965
    How come you went with electric pump? I can’t believe you haven’t been driving it for the past 22yrs! Very nice.
  8. 1965
    None of that looks good. Looks like it had something previously go down and wasn’t cleaned good when repaired. I’d say cam bearings need replaced looking at those pictures.
  9. 1965
    Those I get; I don’t get all the frame behind rear of the first set of pictures. Looks like 3 or 4’ of extra frame?
  10. 1965

    03 cx 613

    1965 replied to RCD7595's question in Mack Truck Q & A

    Both my CHU’s had them (09 & 12). 09 was broke when I got it (welded up), don’t have a clue what it’s for (can’t be much). Both trucks had maxi-torques in them (MACK TRANSMISSION!!)
  11. 1965
    Is that it hanging off the side of the truck?
  12. 1965
    So your saying the 5th wheel is going to be where it’s at now? That much frame behind the last axle? Got to be a special trailer. Like to see 1.
  13. 1965
    Didn’t know she even had teeth with them beautiful legs, they are shiny teeth.
  14. 1965
    Question, if you were to hit a stump (or whatever) what would keep it from flopping back besides the top of bucket? Guess I’m asking do you need a stop of some sort? Since no driveshaft doesn’t matter other than snapping cable or clamp or chain? From looks of gearbox and frame looks like like a bush hog brand? They are tough
  15. 1965

    Memorial Day

    1965 posted a topic in Odds and Ends

    Thinking of all veterans and there family’s. Thank you! Thank all military personnel who served!
  16. 1965
    Me personally, I like the look of factory muffler the best. I’ve seen some gut them to get the noise, but I prefer the sound of a muffler better too. I like that factory curve coming out the muffler. Seems they did some with curve and some straight out of muffler??
  17. 1965
    They are really close to being as ugly as a volvo
  18. 1965
    Give the new sponsor a try at CT Axle and see what they say?
  19. 1965
    It’s a shame someone thinks they need to explain this
  20. 1965
    There really must be a bad spot in the road wherever they came from? It’s really sad to know that there’s steering wheel holders out there like them! There navigation device must have told them to turn. Maybe it needs updated?
  21. 1965
    Our local power co. had a Ford like that for right away but it just had the 3pt on front.
  22. 1965
    Dang, you must be from the udder side, where they drive on the wrong side because that tractor is backwards. Ha ha
  23. 1965
    What does your farm consist of, you raise crops? Going to haul crops?
  24. 1965
    Agree^^^
  25. 1965
    From hearing you talk; I’d bet very good memories!

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...