Jump to content

alex g

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    1,529

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by alex g

  1. alex g
    I'm thinking your right about the pedal I'm just not sure how to test it
  2. alex g
    My 4 valve 350 did exactly same thing as yours. Are you able to find a cam and lifters I ended up getting a used cam and lucky enough to find new lifters locally. I have a extra set of lifters if you can't find any
  3. alex g
    All comes down to how much you want to put into it yourself as opposed to buying something ready to go
  4. alex g
    Saw one of them at Lititz a few years ago. Guy said you freeze for a hour til it comes up to temp in cold weather
  5. alex g
    Can't make out name on door. Good looking rig though.
  6. alex g
    Is your old switch still hooked up? Should be labeled on it but if not you should be able to get through it with a test light.
  7. alex g
    SOLD. Were coordinating delivery if anyone comes to Canada via Buffalo looking for a load please contact me or Ray. Thanks
  8. alex g
    You can plug of your Aneroid valve and turn the governor up on the back of the pump which may give you a bit more snap but your very limited to any large power gain without spending a pile of money on your injector pump. You probably have a 237 HP engine. Its a good set up and it's built with low HP to not self destruct in its previous life as a concrete truck I assume. Where are you located? It looks very Canadian
  9. alex g
    Here's what I have. About 6 new steel ones and one aluminum
  10. alex g
    Sounds like they've already made up there minds. Government building near me was scheduled to be torn down in the near future. They replaced the roof and tore building down about 5 years later. When asked they said money was already allocated to do so. Some things just don't make sense and never will
  11. alex g
    I just sold a set of lower boxes for R model but I have new tops. You able to send a pic of what yours looks like?
  12. alex g
    Was probably worth it and I'll bet he'll do it again
  13. alex g
    We need Mr.Wild to give his opinion on this one
  14. alex g
    Most fitting way to describe the masses😁👍
  15. alex g

    Mack Models

    alex g replied to Brooke B's question in Mack Truck Q & A

    Hard to say what there worth without seeing what they are. I'm assuming you have Mack truck models as opposed to mac models
  16. alex g
    What are you looking for I have some interior and sheet metal parts
  17. alex g
    Welcome aboard. Love to see pics of trucks in your part of the world
  18. alex g
    If your putting more fuel to it your problem may me overfueling as compared to radiator problems. Is your pyrometer running hot? Sounds like you've already checked cooling system
  19. alex g
    I've watched some of those old tractors. There not fast but they sure do pull
  20. alex g
    Easier to value with more information. Is it roadworthy? What condition overall is it in ? Maybe a few more pics
  21. alex g
    I have the air ride crossmember the cab sits on and some other pieces for air ride cab if your interested
  22. alex g
    Still gonna need more information. Does it turn over? Does it try to fire at all. There's a sensor on the flywheel. I'm guessing that's your problem
  23. alex g
    I realize there's more to it than this but a bad or plugged oil filter will definitely lower your oil pressure. When I started driving I worked at a place where maintenance was not so good. I remember my oil pressure dropping one day I got back and reported it. They spun a new set of filters on and it was back to normal again. And yes all they did was filters no oil change
  24. alex g
    Where you located?
  25. alex g
    Sounds right to me.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...