alex g
-
Posts
1,529 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by alex g
-
Alot of interesting stuff there. Owner is a big KW fan. There building this one not sure of specs but very sharp looking in my opinion
-
Saw this one at Rodeo Du Camion last year
-
Packers from Stoney Creek Ontario. My daughter just started working in shop there. She's working towards apprenticeship. Apparently they run them with tridem trailers to west coast
-
Pm sent
-
I'm not sure if I have a complete set I'll have to look but I know there new in boxes I'd sell. Pm if your interested. Alex
-
Set of 38 Mack rears on nuway air ride 3.65 ratio on 24.5 spokes Came out of 90 CH. $1300 u.s.
-
Looks good
-
Local Napa store sent a pump out for me once to get rebuilt. A local parts store near you may have your answer. I'm not sure if b model water pumps are same as early R model 2 valves but I have some nos of them. If you get to the point where you remove your water pump post a pic I might have one. Have you checked to see if pulley has play in it. That's what happened to mine.
-
Smokin Buddies
alex g replied to AZB755V8's topic in Antique and Classic Mack Trucks General Discussion
Nice I've never saw a gold bulldog ashtray I have a chrome one myself. -
Welcome aboard. We like pics. Mack museum is best bet but apparently closed at this time. A good Mack dealer can run vin for you
-
She's a beauty too bad can't get to a show to show it off
-
You can pull air tube off turbo and look at it and try to spin it. Obviously if it has issues spinning by hand there's a issue. Don't worry though you shouldn't have a problem sourcing a used one I have one on shop floor off a 300.
-
Happy birthday 🎂
-
Welcome aboard I'm thinking if you have no air leaks it's possibly your compressor. Did you try adjusting the new air governor? Its possible it's set to low. Did your brakes not automatically engage when your air pressure dropped? Btw cool looking old White
-
New arrival
alex g replied to Mike Harbison's topic in Antique and Classic Mack Trucks General Discussion
Good looking truck Mike and great deal on trucking there 👍 -
I'm going to research when engine was built I think that's the key. Thanks for replies so far
-
I looked on valve cover it says 2000 engine. This is what confuses me because I would also assume it was built pre 2000
-
-
This is possibly a Canadian road rules question I'm not sure if same rules as U.S. I have a guy interested in my 2000 CH but he doesn't want it if he has to install elog. He would be crossing border to U.S. The truck was built in January 2000 I'm trying to decifer rules but I'm not a lawyer so I'm confused on the issue. So far here's what I've found hopefully someone can help
-
Be careful with plunger not sure how far you have it apart but on R model there are bolts to hold pedal mount to floor and other bolts to hold valve to base
-
Mack prices for exhaust are inflated. Your better off to go to a truck exhaust place and they can custom build whatever you need
- 1 reply
-
- 1
-
-
Ask as many questions as you like that's what this forum is all about
-
Good job 👍
-
Is this what your looking for it's off a V pump. Pm me if interested
-
From the pics I'd say thats a 2 valve. If it runs good it's a keeper
BMT Forum Logo
