Popular Post eddeere Posted November 21, 2015 Popular Post Share Posted November 21, 2015 Found this B 75LT locally in a barn. Stored for over 5 years started every few months and run but never moved. Asking $6500. Any thoughts, Thanks. 9 Quote Link to comment Share on other sites More sharing options...
41chevy Posted November 21, 2015 Share Posted November 21, 2015 B-75 1955 to 1966 1,619 total production of all series T, LT, S, LS, ST, LST Need cross member and rail work for photos. Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment Share on other sites More sharing options...
Outbehindthebarn Posted November 21, 2015 Share Posted November 21, 2015 Is that the longer hood version? Quote Fun is what they fine you for!My name is Bob Buckman sir,. . . and I hate truckers. Link to comment Share on other sites More sharing options...
41chevy Posted November 21, 2015 Share Posted November 21, 2015 Is that the longer hood version?yes. 1 Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment Share on other sites More sharing options...
Superdog Posted November 21, 2015 Share Posted November 21, 2015 If it's a B75LT,the rears aren't original,as it would have been a single drive axle.Also it wouldn't have had a turbo.Not a deal killer though if done right. If it's solid as it looks,I wouldn't let it get away if you want it. Make him an offer,you might get lucky. 2 Quote Link to comment Share on other sites More sharing options...
b615rich Posted November 29, 2015 Share Posted November 29, 2015 Good advice from SD. If you like it (B-75's are cool), go for it but I'd definitely negotiate. That rear end looks like a lot of work (can't really see what's holding the rear axle). Would be an "S" if a factory tandem, but lots were stretched. Good luck! 2 Quote Link to comment Share on other sites More sharing options...
Dieseldriver65 Posted November 29, 2015 Share Posted November 29, 2015 Good advice from SD. If you like it (B-75's are cool), go for it but I'd definitely negotiate. That rear end looks like a lot of work (can't really see what's holding the rear axle). Would be an "S" if a factory tandem, but lots were stretched. Good luck!I'd love to find a B75 that's close to original,most I've seen have been stretched and repowered. 2 Quote Link to comment Share on other sites More sharing options...
220cummins Posted November 29, 2015 Share Posted November 29, 2015 The price seems a little steep for the condition some things. That truck hasn't had a rear crossmember forever or so it looks like. Just when you think you've seen everything.... Otherwise it has nice potential 1 Quote Link to comment Share on other sites More sharing options...
Bigdogtrucker Posted November 29, 2015 Share Posted November 29, 2015 I'd love to find a B75 that's close to original,most I've seen have been stretched and repowered.That is true. I plan to do some things to mine, but stuff that would have been done in the "60's/"70's and keep it somewhat period correct for it's working era. No air ride or LED's for me . Hope you get that truck OP, has great potential! 1 Quote Link to comment Share on other sites More sharing options...
mowerman Posted November 29, 2015 Share Posted November 29, 2015 ya seems a little high,,,but looks like it basically just needs cosmetics,to make it nice,,not too much$$$,,if your doing most of the work...good tires and running,,a big plus..i would flash 4G,s at him see what he says.good luck..bob Quote Link to comment Share on other sites More sharing options...
Dieseldriver65 Posted November 29, 2015 Share Posted November 29, 2015 Price don't seem bad at all compared to the junkers I've seen sell for 5 grand or more! 1 Quote Link to comment Share on other sites More sharing options...
b615rich Posted December 1, 2015 Share Posted December 1, 2015 Wait long enough you'll find what you want - probably right after you give up. Or, you just might see something you never expected. Best of luck either way but as the guys always say, buy the best you can afford. Cheaper in the long run. 2 Quote Link to comment Share on other sites More sharing options...
thomastractorsvc Posted December 1, 2015 Share Posted December 1, 2015 Are you up for another project looks like it came from an auction with the writing on windshield also looks like the trunion is rust through or might be an illusion but wheel seals are leaking Quote Robert"I reject your reality and substitute my own." Link to comment Share on other sites More sharing options...
Popular Post AZB755V8 Posted December 1, 2015 Popular Post Share Posted December 1, 2015 Take a look at my E9 post, I started with a B75 that looked to be about that condition. I paid about that for it back years ago. after an additional 4 donor trucks It is totally restored now. Start with something that you are comfortable with and find the one that is in the BEST condition you can AFFORD. You may change direction in the restoration and more than likely get another one for parts. descent trucks are out there but going up in $$. As long as the sheet metal is good with minimal rot, rust and dents it worth thousands in the body shop. Those rears look vintage correct and reverse camelback was available in 64 I believe. It maybe born a 6 wheeler but many truck have changes rears, engines, trans and frame length though their lives. If it is what you are looking for make a deal for it, worst is saying I should have bought it and passed. If you go and sell it what is the worst you are going to lose a grand or two? 3 Quote Link to comment Share on other sites More sharing options...
eddeere Posted December 1, 2015 Author Share Posted December 1, 2015 I have not made a decision on the truck yet. Emailed the Mack museum for some basic specs on the truck last week have not heard from them yet. Thanks all for all the input. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.