leversole Posted December 22, 2013 Share Posted December 22, 2013 Mocking up the back plates for the trailer hitch...raining and cold today, doesnt bother me!!! 2 Quote Link to comment Share on other sites More sharing options...
Mike Posted December 22, 2013 Share Posted December 22, 2013 Hey Les......don't forget to cut out some holes for tail lights. Other than that looks like your on the right trail. I'm liking that garage even more. mike Quote Link to comment Share on other sites More sharing options...
gearhead204 Posted December 22, 2013 Share Posted December 22, 2013 better drop it another 10" looks like at that height you can still get under the hitch to check fluids and adjust brakes etc. also better add some 2x4's for them hard pulls l.o.l. 1 Quote Link to comment Share on other sites More sharing options...
farmer52 Posted December 22, 2013 Share Posted December 22, 2013 Is that marine grade plywood?Looks good! Quote Ken PRR Country and Charter member of the "Mack Pack" Link to comment Share on other sites More sharing options...
Bigdogtrucker Posted December 22, 2013 Share Posted December 22, 2013 Pretty neat idea! Quote Link to comment Share on other sites More sharing options...
thomastractorsvc Posted December 22, 2013 Share Posted December 22, 2013 I like that you are bolting it on instead of welding it, as far as receiver height I think you look ok, you can also get drop or adjustable hitches, I have several up to a 9" for my dually pickup so I could pull a small trailer Quote Robert"I reject your reality and substitute my own." Link to comment Share on other sites More sharing options...
Vladislav Posted December 22, 2013 Share Posted December 22, 2013 If you have no plans to use a trailer and plan this thing for a show only you may just paint the ply wood and end up with it Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment Share on other sites More sharing options...
jackb61sx Posted December 22, 2013 Share Posted December 22, 2013 Leslie here are some pics you asked me for I will get you some more when I get the truck later this week. You can see its all welded on flush to the rear frame and braced across the top, the plate is 1/2" steel with the trailer plug tucked in on the right side out of sight. Quote Link to comment Share on other sites More sharing options...
cfto30570 Posted December 23, 2013 Share Posted December 23, 2013 not the prettiest ...but i could pull anything i could back up to... Quote Link to comment Share on other sites More sharing options...
Timothy Maikshilo Posted December 23, 2013 Share Posted December 23, 2013 Looks great! Good template! Quote Link to comment Share on other sites More sharing options...
GreenGiant2 Posted December 23, 2013 Share Posted December 23, 2013 I think 1/2 ply wood is good enough. some 16 penny nails will also do.haa haa Quote We the unwilling, Lead by the unqualified, are doing the impossible, for the ungrateful. Link to comment Share on other sites More sharing options...
Mike Posted December 23, 2013 Share Posted December 23, 2013 I think 1/2 ply wood is good enough. some 16 penny nails will also do.haa haaMaybe........but I was thinking some heavy Elmer's Glue should do just fine.mike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.