cfto30570

ok good idea thanks bob

ive got a couple new headlight buckets for the u model but rather than just bolt them in im hoping to find a couple of metal backings that go inside the front end and accept sheet metal screws if anyone has a couple of nice ones id like to mount the headlites that way its been awhile but im hopin to get back on the ole Froehlich u model thanks 585 356 6481 Charlie Hackett Leroy ny

i lucked out and found a brand new one not to far from where i live so thanks

im still looking for a cooler cover any ideas ?

not the prettiest ...but i could pull anything i could back up to...

i took this in colorado springs co @ the national.......look share copy you have my permission

copart has a bunch of old new penn tractors intls and some macks a couple screws most everything is electronic with 7spds some water damage from sandy and some nw/normal wear a hand full of singles but theres one a twin screw number 6?? that ive run its a mack with a roadranger and reyco 4 spring suspension nice tractor their selling it because our union wont let them run it on linehaul anymore w/o air conditioning this normal wear stuff is probably gonna go cheap their in scranton and camphill pa

yes google copart theres a bunch of old new penn on their site some have water damage nyc storm others nw/normal wear their under heavy trucks

yes the stainless steel grille

id like to get a air to air cover for my u model not the cooler just the cover 585 356 6481 ..or cfto30570@frontier.com thanks

ive got a tan plastic foam dash in our 79 umodel its an old fleet tractor so most of the corners have been damaged by radio boxes cbs handcarts and who knows what else may have caught a ride in the cab i didnt intend to do the interior @ this point but as long as the seats are out to replace a couple weak floor panels and the headliner is down to reweld the wind deflector supports i guess theres no better time to freshen up the inside of the cab can you folks suggest any ideas as to how to get the dash lookin better its has quite a few flaws so im guessin that replacing is the way to go where could i obtain the soft parts to redo this project new / used ? im open to any suggestions check out the easy access hole that they installed on the right side of the floor

like i said previously i was drawing a blank ...so i appreciate everyones help on this i will probly be back with some more questions thanks guyz

ok thanks that makes sense that it coulda been a stick on .i like the cloth hood lacing that jh put up i think thats the way im gonna go ...i appreciate the get backs from everyone .

thanks j.h & vin i moved the umodel to a different building theres no heat or electric but theres lots of windows and sunlight so ive got a little kerosun heater and a generator . so im just gonna do some little jobs like the headlite buckets hood gasket rewire the new hood ect ect just small jobs .it will be nice to just be able to go down and spend some time with the ole mack im kinda freightlinered out .......does your ole umodel have anything on the cowl to suggest it had a gasket ? im sure somebody around here will come up with some good ideas

i need to come up with a hood / cowl gasket for the 79 u model it was just rubbin fiberglass against metal when i got it ive heard its available in 20ft roles but i figure i need approx 7 ft so does anyone have any ideas what i could do for a gasket

thanks for responding back its not that big of a deal i was just wonderin ....ive seen some pretty wild type fleet repairs over the years

thanks for the compliment im lookin forward to gettin it back together .

thanks for the answers ive seen a couple different ways sheet metal screws into a tin ring and then just bolted in with machine screws i also have the rectangular trim pieces with the 2 tabs and 2 bolts i was just wonderin

yes i do 585 356 6481

ive got 6 1100x 22 tube type traction tires on daytons 4 are traction caps 2 virgin lug style located in leroy ny any questions give a call 585 356 6481 i was thinkin 300 for all but make a really fair offer and you could be the new owner charlie hackett.

ive got a complete bc lll set @ 310 with no jake complete fan to flywheel i drove this engine before i took it out but i just dont have time to complete this project its located in leroy ny we can drop the pan if your a serious buyer any question give a call anytime 585 356 6481 charlie hackett i was asking 1500 but will certainly consider any reasonable offers this cummins was in a single axle ford 9000

im getting ready to install 2 almost new headlite buckets in the 79 umodel any idea what kind of fastener would of been used originally its an old fleet truck and had small machine screws but im pretty sure the fronts been repaired many times it lived most of its life doing city pedal in maspeth li ny thanks for any help .

no it does not have an eng brake

i have a bc 3 cummins good runner that i drove before removing from the truck to use in one of my projects its set @ 310 hp fan to flywheel came out of a ln ford charlie hackett im asking 1500 or make me a reasonable offer im not going to use it !