Jump to content

b61mack

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    1,036

  • Joined

  • Last visited

Everything posted by b61mack

  1. b61mack
    I had a 77 R 600 that the brake lights would not work,it was the relay by the fuse panel under the dash. Ron
  2. b61mack
    That is about the best looking F Model that i have seen. Ron
  3. b61mack
    I have tubeless and run 60 psi in the back 90 psi on the front. when i went to Macungie hauling the F-Model i pumped the back up to 80 psi, alot better ride bobtailing with 60 psi than with 90-100psi. Ron
  4. b61mack
    I see you are from Indiana, there are tons of dump trucks and semi dumps that are all over Indiana that haul out of the Delphi Limestone quarry i was wandering if you ever hauled out of there.( more Macks and KW than all the others put together) Ron
  5. b61mack
    Take the injectors to a diesel injection shop and have new injector tips put on it will be alot cheeper than buying new injectors. Ron
  6. b61mack
    I know where a non turbo V8 Mack engine, if anyone is interisted located in north cental indiana.
  7. b61mack
    Rob if you want to go real fast i have a set of 3.65 gears out of a 97 Mack. are you going to Elnora this weekend. Ron
  8. b61mack
    You should have them check it with the parking brake off when there is pressure going to the valve. with the brakes set there is no pressure at the reversing relay on the intake so it will smoke more. Ron
  9. b61mack
    Rob i have a RTO14613 3.87 11.22.5 hitred tires at 2200 i am running 79 to 80 MPH. Ron
  10. b61mack
    Morgan, Mike and I will be there saturday morning rain or shine. got your cam & lifters out of the 300, if you want me to bring them let me know. i was planing on bringing the block and cam but didnt want to haul that block all the way down there.( drilled 12 holes in a block of wood and numbered which hole they were in). Ron
  11. b61mack
    My brothers 78-F Model has a 350 cummins and it is 12 volt negative ground he has 4 batteries. an E6 MACK engine will start with 2 good 12 volt batteries. Ron
  12. b61mack
    I thought Fireman and Mikey had the best looking Macks out there. in the aug.,sept. landline magazine there is an artical about Jerry Kissingers 91 Superliner he took best of show in the working combo at the great west truck show in Las Vegas, Nevada. Congratulations to both drivers. Ron
  13. b61mack
    Morgan i have a cam i have to look a little deeper to see if i have any lifters. still trying to figger this new format out( i hate change), im not too smart on these computers. i will let you know. Ron
  14. b61mack
    Hi Morgan i bet you could use some 3.65 rears to go with that overdrive and 24.5 tires. i will be talking to you. Ron
  15. b61mack
    I dont know anything about boat motors but,i replaced the oilcooler on my E6 because i was getting oil in the coolant.i would look at the oilcooler. Ron
  16. b61mack
    You could get the brackets off of an R model but i have drove R models with and without shocks on camelback my opinion you would be waisting you time and money they dont help. Ron
  17. b61mack
    Dose anyone have a chart on B61 model front axles, i am looking for the numbers and the pounds rating on the axles. i tried to get on the oldmacksrus.com website for the axle numbers but no luck. Thanks Ron
  18. b61mack
    Morgan, Mike and I were leaving wed. morning.i will be hauling Mikes F-Model he will be driving a pickup truck,wish we had a longer trailer to haul both. if you are looking for a motel theres a Super 8 one exit west of the Macungie exit. nice motel,last year around $80 a nite. we are staying at the Hamton Inn on st.rd. 100 a little pricey over $100 a nite.will be leaving sunday morning to come back home. i will see you out there. Ron
  19. b61mack
    Rob i was hoping to meet up with you at the truck show, sorry you could not bring your truck. alot of nice trucks. did you see the yellow pete and the silver 54 pete, the guys that ran the truck show said the guy driving the silver pete was a royal ASSHOLE i guess the pete fit him perfect. i hope you can make it to Macungie. Ron
  20. b61mack
    Morgan my brother and i were going to leave thursday too, if you and Rob are going thur Delphi we will wait on you guys. let me know what time you will be comming thru so we can meet up,if you still have the same phone# i will give you a call next week. Thanks Ron
  21. b61mack
    Check with Watts Mack i bought the whole kit a few years ago, they used to carry the cross tube and tierod ends. Ron
  22. b61mack
    Try IOWA80.com they have few wood steering wheels.
  23. b61mack
  24. b61mack
    Mike that is a great looking truck all that chrome will keep Mikey busy,the stacks look better behind the doors instead of behind the sleeper. i will have to check it out at Walcott. Ron
  25. b61mack
    I bought a B model a few years back in Hyden KY and the truck was restored by Lexington Mack anyone know if they are still in busniss. Ron

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...