hicrop10

Thanks 41chevy.I have the front jacked up about 6" to give me a little more wiggle room.Biggest problem is that it so damm heavy.Once it on the floor not so bad,but when your trying to locate and twist all at same time it can be tough.

After putting the cab back on the truck and getting it running the steering box decides to start leaking.I was just wondering if the box comes out through the cab or if you Jack up the front end and take it out the bottom.

So are the B's there and for sale?Do we have a location on this yard?

Wonder if they still have any of the b models left?Would like to check them out next time I M out there.

I know right where that photo was taken.Can't imagine what JDM would be using a box truck for back then.My father had the first enclosed grease truck built back 1967-69 using a r model Mack.

There will always be some dumb ass out there that's want to make it hard for someone else.That reminds me of the time I was coming down rt.33 in PA heading to rt22.As I was heading south I notice the road thinking down to one lane ahead.Now mind you I had the lowboy with a wide load and I wasn't going to fit.The company that was doing the roadwork decided to set up the barrier a day early.Well after I had the road shut down the state cops showed up.I showed them all my paper work and all they could do was look at me.I told them to move the cars behind me so I could backup to the last exit.The cop said that was over 3 miles,I told him to get at it.Gotta say he had a sense of humor. When I got to the end he has a can of Pepsi waiting for me.

Found this old dog left in a parking lot,waiting for a tow.

Sorry for your loss.41chevy I did just that,brought with my 56 Ford f600 back with me from Karaspell Mt.

I was at my friend's place this morning and my camera failed.Will be back there in the morning.He did tell me that his are from a b61,just moved their position on the hood.If you want call me around 7-730 and I should be there by then and you can tell me what pic and measurements you need.

Call me at 215-669-1252

I may have a pic of what you want.Mine would be of a B87,it all apart now but I think I have a pic of what you want before I removed the hood.I may be up at my friend's in the morning and he has a B81 dump, let me know if you need any other pics.

We used Marko when we were in the excavating business. Was going to give them a call.I am first going to take it all apart and fix what I can myself.

In philly, will be checking some other places this week.

Yes, I have been to a local shop.The price was worse then the price I got to replace my 08 f150.The price was $2,000 and that was me doing all the work.Thanks for the info.

Guys,I am looking for a good radiator core for my B87 that I am putting back together.It measures 31 wide x 34 high x 4" thick.The header is 8" wide and has 60 3/8 nuts and bolts that holds it all together.My old one just has to many pin holes in it to use.

1-17-17.For all of you that don't know this date but it's the day that the new president replaces the no good, four flushing,low laying,scum sucking,piece of crap,shit for brains that some call the president leaves office.

I'll like to check out those mogul.

If I can find it I will post it here.For wind power to supply enough power for the whole country you would have to have a wind turbine on every sq. inch of just the states of OK.,kan, neb,and two others that I can't remember.

In a mere 4 hours I will know just how that fellow in that truck was feeling.I will be plowing at the philly airport,and I was told it looks like we will be plowing till sometime Monday.My loader will be a 35-40 year old trogin loader.The good thing is that it does have heat.Will try and take some pic of it.

Phildirt,I just found that diagram in my papers,will be a big help.I will get back to working on the truck once we get past this winter storm.

I do have the switch that has the 4 large terminals on the side and 3 smaller ones on top.

I am having a problem with hooking up my sps.I have included a picture of the sps.My problem seems to be with the 3 smaller terminals.Any help would be great.Thanks

To complete my B87 and find a nice e model to repower and use as a daily driver.

Sorry guys but have already started the sand the first letter.What my thoughts are to redo one of the 2 and at a latter date use it as a pattern to make another sign.

That's a 4x8 piece of plywood behind it.