Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,438

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    You suppose this is a sign of coming events?
  2. terry
    I think the he has the SPS switch that has four battery cables hooked to it, i think it was a later SPS switch
  3. terry
    Very nice pair of macks!
  4. terry
    The G600 should be listed as a C600
  5. terry
    Now that I know what a quill is, have seen it done in the shop where I work by a guy with a portable setup.Seems it was about twice the 700.00 price . Was done to a couple of trucks with no problems. terry
  6. terry
    There isn't a tag on the trans, should be stamped in the case, is this the 6speed with 5 in the front box and direct ,low and reverse in the back box?
  7. terry
    Whats a quill?
  8. terry
    Didn't the early F model mack have a spring setup to lift the cab also?
  9. terry
    Alot of times people would use the drain place for one end of a tank type heater
  10. terry
    I believe the macks for years were 50,55, and 60 inches
  11. terry
    Can't say for sure but I don't think you split anything on a 15 spd.
  12. terry
    Can't believe it hasn't sold yet!
  13. terry
    S means 6 wheel, T means tractor.
  14. terry
    Very nice selection of Harleys! terry
  15. terry
    I've seen them old mack engines with alot more blowby than that, and they can run an awful long time. terry
  16. terry
    Some were definetly made that way , I owned a B421 years ago and it was that way, I believe it was a 1963 year. terry
  17. terry
    Pretty much what Mike said. Mike did they have the 285 engine that early?
  18. terry
    I believe there is also a 300 series now.
  19. terry
    Almost need a little more info, that old of a truck could have had alot of changes over the years, two stick is probably the old six speed. five speed with low, direct and reverse on the other stick. could be a full 300 or the old 285 series engine.
  20. terry
    You will have to change rear ends too, a 2070 runs about 5.50 rears.
  21. terry
    What superdog said!
  22. terry
    I drove many 237 with 5 spd. with 22.5 tires you are lucky to get 68 MPH with the engine wound tight.
  23. terry
    I don't think a direct trans with 4.17's even with 24.5 tires is going to give you a good road speed, what do consider a good road speed? I can tell you for sure I had a DM dump with a 12speed overdrive 4.17's and 22.5 tires and at 1600 RPM would run about 65, plus I had the motor set to run 2300 RPM, it would really fly!
  24. terry
    B model and 75+ mph, must be geared pretty awsum!
  25. terry
    Good and short explanation, I often wondered what all the prefixes meant.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...