terry
-
Posts
2,352 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by terry
-
What model is the dump truck? Chances are the 75 is just a x107 six speed which will not work good with a 350 engine, need to check rear ratios to see if there the same. Terry
-
Is this a single axle, or tandem, single axle on the older Mack’s can be front or top mounted? Terry
-
I would say the R 614 is the ratio. Terry
-
I have run into that greased inner bearing, and oil outer bearing with the middle seal on a B model Mack, just eliminated the middle seal and a different inner seal, and was good to go, terry
-
I believe some old international’s had the front end, I think they were part of Mack at one time. Terry -
Definitely a couple of hard raps on top of u-bolts after assembly will tighten a little more! Terry
-
I believe that is what they call semi-round u- bolts. terry
-
Mack r600
terry replied to Nick mack rd686s's topic in Antique and Classic Mack Trucks General Discussion
I bet them ground guys got a royal chewing out! Terry -
Looks like he already had it rebuilt. Terry
-
Don’t know for sure, old Mike harbison would have been able to answer that, lost a lot of Mack info when he passed. Terry
-
That’s a B70 something, so a longer hood. Terry
-
You’re doing good Heinz!👍. Terry
-
R Model Farm Truck
terry replied to seyser's topic in Antique and Classic Mack Trucks General Discussion
Could have made your own with some gasket material 😁 terry -
Camelback can have the transverse rods, i guess it depends if it was ordered that way or put on later. terry
-
I wonder if you do that cross torque rod you should do it on both rear ends, I have seen where it was added on the back rear only and the frame cracked between the two holes drilled in the frame for the bracket? Terry
-
I do believe in the 70’s you could get a Detroit in a R model. Terry
-
The slightest crack in a return line will let it bleed off, Terry
-
Yeah that is a newer style, than I was thinking of. Terry
-
The lift pump I am thinking was on the older engines, E7 might be completely different.🤷♀️. Terry
-
A pic would help
-
Sounds like the lift pump with the plastic check valves, check them first. Terry
-
As far as china made parts, awful hard to get away from, I have bought bearing races from Mack dealer, yeah made in china! Terry
-
I had an older DM with a Rockwell axle that took these straight pins, all Mack axles I have seen are tapered. Terry
-
Right Hand Drive Anthem
terry replied to mrsmackpaul's topic in Modern Mack Truck General Discussion
You know the Mack’s have went to pot if customers state there hating there Mack’s! Terry -
Real simple ,someone slid the single axle out and replaced with a tandem. terry
BMT Forum Logo
