terry
-
Posts
2,352 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by terry
-
Should give you alot of trouble free miles for a long time! Alot better than them emission plagued engines along side of the road! terry
-
Depends if your pump is separate from control valve or built together, if hoist is staying up and not leaking at the packing on each stage your good to go!
-
Every dump box i have ever seen is pressure up and gravity down, no two way cylinders on dump truck boxes i have seen, two way cylinder on side dumps and ram eject trailers, and maybe some other applications. terry
-
the days of laying a part on the counter and parts man going back to get are gone! terry
-
That post is seven years old, more than likely gone !
-
Very nice F model! terry
-
Should have found another 12 speed or fixed that one, best trans mack ever built! terry i know this doesn't help with your problem, i just had say it!
-
Maybe post it with pics and info, with a price in the for sale section. Terry
-
does it have a rubber or bronze trunnion bushing? if it has the bronze one and needs replaced, might also need the trunnion itself. terry
-
Quite the rig!! terry
-
That phrase "needs work" can be pretty much wide open!! terry
-
love them 12 speeds! terry
-
did you look at the rears to see what ratio they actually are to be sure? terry
-
Yes there pretty close.
-
you better check the rear end ratios, if that had the 6,7 or 8 spd mack trans. originally, the rear ends have to be changed to work with a 8LL transmission. terry
-
New here! B60T project
terry replied to SkippyMack's topic in Antique and Classic Mack Trucks General Discussion
Glad to hear from you again, looking real sharp, bet it was a little breezy with no doors!! terry -
would have to say it isn't a T675, looks like no oil cooler there on the left side. terry
-
want to buy '86 E-6 4 valve Exhaust manifold, with Ambach Inj. Pump.
terry replied to Joey Mack's topic in Parts Wanted
Try manders truck salvage in lakeville Minn. lots of mack parts. terry -
Biggest problem i see with one of the trucks for a dump truck would be over weight on the steer axle. and you need a longer wheelbase for bridge laws. terry
-
maybe i am missing something, what is so strange about the way the front wheels are attached to the spokes? terry
-
i used to hear to put the outer seal in backwards so it would come out there first.ever hear this? terry
-
With them 5.55 rears and that seven spd trans changing to a 9 or 13 spd trans will not work, rear ends are to slow , that seven spd has a real wide overdrive, i have driven them and don't like it for a dump truck. terry
-
On them 12 speeds there was a overdrive, which most are, had a direct and overdrive on the split, but some of the early ones were a direct, which was a underdrive and direct on the split.
-
As far as i am concerned that 1070B 12 spd, was the best trans mack ever built. terry and that X107 and 2070 takes a whole different ration to work right.
-
good money for a "75" terry
BMT Forum Logo
