Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,208

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    Quite the parts hoard! Terry.
  2. terry
    Wow wish I had something encouraging to say.😩. Terry
  3. terry
    I’ll bet the K is for glider kit, put all your own running gear in it. Terry
  4. terry
    The water sensor is on the back of water manifold towards firewall, and I believe oil sensor or fitting is above screw on oil filters. Terry
  5. terry
    Looks like a RS model, maybe the F is a misstamped R 🤷‍♀️ But it seems like I have seen some RS models with that dark interior. Terry
  6. terry
    But didn't glider kits come stamped with a K in the seriel number? terry
  7. terry
    The FS is a F model, 685 is a 237 engine, LST is lightweight, six wheel tractor m, T is for tractor, that cab tag is believe body number? Terry
  8. terry
    Looks like you got your hands full on that repair job!😁. Terry
  9. terry
    Unless you drain tank’s daily get the air dryer. Terry
  10. terry
    They used the steel dash up to 72 or early 73. terry
  11. terry
    Never seen a five spd. Behind a 350? Terry
  12. terry
    Thats a new one on me! 👍 terry Wonder if that W means wide?
  13. terry
    I don't know for sure, but it seems like the first puff limiters were not connected to the trans? terry
  14. terry
    Were early puff limiters no connected to the transmission? Terry
  15. terry
    My guess would be the rear suspension, very soft and leans real easy,ok for a hobby truck, but the rest don’t look to bad. Terry
  16. terry
    Very weak rear suspension. Terry
  17. terry
    Have you ever seen a simple job stay simple! 😁 terry
  18. terry
    Yeah I have done it by myself too. Not no more, my skin has gotten so thin just a nick and I bleed all over, I sold my truck, but the last starter I put in I had blood dripping everywhere! Terry
  19. terry
    Two people, one with a rope around starter from the top, and one leaning over left steer tire to guide in, Terry
  20. terry
    The outside metal looks good, did you click on the links pics? The floors are gone big time! Terry
  21. terry
    That real hard bolt to reach, replace it with a 12 point head bolt, makes it easier. Terry
  22. terry
    Something really funky on that fan shroud, could it been that high for a Cummins engine? Terry
  23. terry
    Cool! Does it run and operate ok? terry
  24. terry
    Probably different offset on the rims, and yes I have seen that on a lot of DM’s with that tire rubbing. There are relief valves in the steering box and stops on the spindles, maybe the truck when new was set up with narrower front tires, and now the wider ones rub.🤷‍♀️. Terry
  25. terry
    I had a 237 engine that had a loose exhaust seat, ran quite awhile that way, had the pop,pop when you let off it or coasted with it, when I pulled the head you could see where it was moving up and down in the carbon buildup. Terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...