Jump to content

Hobert62

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    1,971

  • Joined

  • Last visited

  • Days Won

    18

 Content Type 

Everything posted by Hobert62

  1. Hobert62
    My grandfather had 3 emeryvilles. My dad always said the one was supposed to be his. A real large car. Had a 238 and rubber block suspension. They where all long gone before me.
  2. Hobert62
    Is there a reason why they weren't put inside the cab where the the light and buzzer are anyway?
  3. Hobert62
    Somebody has a new trailer they want to "play" with.
  4. Hobert62
    And alot closer to the ground!
  5. Hobert62
    When looking at the building im thinking big garage door on the left side. Some people may think its wrong, but I'm thinking it would give a direct hotline for the extra "help" that's needed on so many of my projects.
  6. Hobert62
    Like said above you had a trip you will talk about for a long time. Glad u got it home.
  7. Hobert62
    I didn't crack any lines open on mine. Truck sat for a year or so since it was last ran. It does take a little throttle to get it to first start up.
  8. Hobert62
    When I put new fuel lines from tank front with a spin on filter it only took me about 75-100 pumps to fill both filters (spin on and original canister) to have fuel returning to my tank. It didn't pump hard but I could feel a slight drag while pumping. This was on my B with a 673
  9. Hobert62
    Ouch! I only gave 2500 for the truck. Glad the "last one" is still out there though.
  10. Hobert62
    I like the look of the long hood R's. I don't think I ever saw one in person. Not real common around here
  11. Hobert62
    "Freightshaker"
  12. Hobert62
    On that style tractor protection valve the line on the right is the supply. It has air if the truck has air. The line in the center of the valve is the line that controls the service breaks. It only has air when breaks are applied. The first valve and switch is where the foot valve and trailer hand valve are combined which supplies trailer brakes through the center line going into the tractor protection valve. That one is the brake light switch it only has air when either the pedal or hand valve are applied.
  13. Hobert62
    what part # or style do I need to look up for this style bumper? Minus the fog lights? I like this style and my be an option for my B. thanks.
  14. Hobert62
    Top pics are a dc-1 bendix double check valve with brake light switch. "Just replaced mine". And as stated the bottom pics appear to be an interesting configuration for a low air pressure switch.
  15. Hobert62
    I think on the KW you have to switch the whole headlight bucket from side to side.
  16. Hobert62
    What did you use as the rings to keep the paint off the tires? I've done that before and works pretty good.
  17. Hobert62
    I thought about spraying mine with silicone spray or something like that to try and soften it up some before I take it out.
  18. Hobert62
    Good luck and keep us posted. Mine is so brittle it cracks if you look at it funny
  19. Hobert62
    If you want something temporary just to what it's doing I've seen them already that just clamp on the #1 plug wire.
  20. Hobert62
    Talk about the museum cought my interest. I was looking closer to the pic and noticed the name on the trailer. I kinda got excited and thought a nice day trip for me and my kids. Then I looked it up and realized the keystone museum isn't in the keystone state. A little more then a day trip but still on the list.
  21. Hobert62
    Poor pic but this ones partially opened.
  22. Hobert62
    The rear part of the deck tilts up then the tail folds out from underneath. They are heavy built trailers all hydraulic operated.
  23. Hobert62
    All of our company trucks come with switches behind the drivers seat. On our freightliners the dumb thing is not all circuits are protected. With my disconnect off and I turn my ignition switch on some of my marker lights and dash lights flash.
  24. Hobert62
    I think it was at York, Pa last year too, if I remember right
  25. Hobert62
    I have my disconnect on the ground circuit. My switch was $30 from a race car/speed shop. It's in the ground wire from the battery to the frame. I only run 2 batteries. No help on maintainer.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...