theakerstwo
-
Posts
3,816 -
Joined
-
Last visited
-
Days Won
7
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by theakerstwo
-
Its easy to talk about 550 and 600 HP at the wheels with any engine but how many guys have checked it.I know guys that can tell you what you want to hear and dont cost nothing.
-
R model running warm but idles normal
theakerstwo replied to Joe palka's topic in Engine and Transmission
That is normal. -
Watch your pressure gauge and turn engine slow till you get max pressure .You can find a place were enough valves wether intake or exhaust will be closed to build pressure on all cyl.
-
R model running warm but idles normal
theakerstwo replied to Joe palka's topic in Engine and Transmission
Your thermostat should have had a bleeder or vent that goes to the top for venting air in the water manifold.Check that -
That is a spacer to make the lining fit a over size drum.
-
The mack engine is also lighter in weight
-
I run a 5 axle dump and i grease the throw out brg ever week if milling and the entire chassis ever two weeks.I never have worn out parts like some i run with that grease at ever oil change.
-
313gc5163p2 plm450276
-
Sorry i will do that this eveing
-
If you look straight down into the head you will see it is marked which is which.Just in front of the valve spring.
-
Volvo/Mack Chicago training center
theakerstwo replied to Mack Technician's topic in Engine and Transmission
Last steps of diesel now that is sad.But i believe it. -
I have a 237 in a B model with the starter on the left side.
-
Pre egr and the best engine
-
I will get photos soon.
-
My clutch leg is bad also so i made me a air assist and it works good.
-
Make sure all tires are same size and that one is not worn dowm more than others.Mis match tires will make the power divider pop.
-
15/16 and there is two bolts in there.
-
OD was on facebook 2 hours ago so he is still not in jail
-
Still for sale
-
Have you ever pulled the liners on a 14L?A special pullers is required because piston and rod will not come out of the top of liner so it all has to be pulled at same time.These are a good engine if its not a egr valve engine.
-
Do you think it could have been the troll?
-
Call the parts department at mack.
- 1 reply
-
- 1
-
-
many times cab mounts can cause a tricky throttle at low speeds but if all other things stated here has been checked then its time to pull the pump.I have replaced the linkage with a cable pull and helped some.
-
I have a ideal but you need to do some checking.Valve seals or guides.Bad rings can do same thing.
-
84. Top turbine 350 2v. Injection pump change.
theakerstwo replied to Bliue dm's topic in Engine and Transmission
If you pull injectors forget blowing air thru them and send them in and have them tested or rebuilt.
BMT Forum Logo
