Jump to content

j hancock

BMT Benefactor
 View Profile  See their activity

  • Posts

    13,372

  • Joined

  • Days Won

    524

 Content Type 

Everything posted by j hancock

  1. j hancock
    Hair gel? Hmmmm..... should look like 50 W oil. Eaton PS-321 or PS-386 synthetic or equivalent.
  2. j hancock
    Don't forget a shave and a beer! Well, maybe not for the kids....
  3. j hancock
    FLA is a little humid so that isn't helping with the water. Sort of surprised that the purge on the dryer isn't keeping up. Could inspect the air inlet to the compressor and the discharge for any damage, kink or restrictions to help with slow air build. If there is carbon buildup in the discharge line, the line should be replaced.
  4. j hancock
    The DM Mack made Lots of money for many folks.
  5. j hancock
    To the left of the LJ is this B-80/81. Both trucks belonged to Mike Trotto at Worcester Sand and Gravel when the pics were clicked.
  6. j hancock
    Amazingly clean original cement mixer shown at the Western Mass show about 10 years ago.
  7. j hancock
    Truck looks Excellent! Take a look at the KBS product line as well. https://www.kbs-coatings.com/
  8. j hancock
    Compressor could be failing. Just water or some coolant when it is drained? Are you running an air dryer?
  9. j hancock
    Keep in mind that Econodyne refers to the type of turbocharging and charge cooling for increased efficiency, etc. So, there were Econodyne Maxidynes as well as Econodyne Thermodynes.
  10. j hancock
    Mack B61 dumping flatbed with excellent paint work. Has a dog riding shoot gun on top of the air cleaner rain cap.
  11. j hancock
    Send him a PM through BMT. The system is linked to his email account and he should receive your inquiry.
  12. j hancock
    Took the picture in 2016 with the Dog being 100 years old!
  13. j hancock
    That's a strange looking Mack B model.....? Nice Job! It will be good to have a big Binder out at the shows!
  14. j hancock
    Beautiful R700 on display at the ATCA National Meet about 20 years ago. It is Roger Gerhart's truck and at the moment, I can't recall which engine is under the hood.
  15. j hancock
    Long hood, Long legs and Loooooong Gone!
  16. j hancock
    Don't know the owner but know what you are saying. Maybe he bought new stacks and ran the exhaust making sure things fit and then he will start fixing the rest of the truck???
  17. j hancock
    Classic lines of the R model Mack.
  18. j hancock
    Excellent, a forever memory is created!
  19. j hancock
    Ford has a focus problem. Not talking about the the car either. Ooops, that's gone too...
  20. j hancock
    Large gasket sheets are available for DIY use. Check out McMaster-Carr. https://www.mcmaster.com/gasket-sheets
  21. j hancock
    Very nice shaft drive AB dump truck.
  22. j hancock
    Looks Fabulous!!!
  23. j hancock
    Vlad is correct and here is the other side.
  24. j hancock
    The gaskets will be a DIY project at this point. Most forgo paper or cork gaskets and use RTV gasket maker.
  25. j hancock
    Depending on tire size, loaded or unloaded, the height ranges between 116.5 and 121.5 inches from a 1976 WS brochure.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...