Jump to content

b61mack

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    1,036

  • Joined

  • Last visited

 Content Type 

Everything posted by b61mack

  1. b61mack
    Except those gay Peterbilt guys that has 10" pipes so someone will notice them.
  2. b61mack
    Looking good Vinny, are you going to have it ready for Macungie next year.
  3. b61mack
    I was thinking I would like to have one too but I keep thinking if I had one I would have all my friends wanting to borrow it, so everybody would be using it more than I would. Ken I guess you know the E 350 is a van.
  4. b61mack
    Is the top fiberglass or can you tell, kind of looks like it with the long rounded corners.
  5. b61mack
    NAPA Gold 1900
  6. b61mack
    There is a new set of Mack bubble back mirrors with brackets on ebay # 231750894501. it says R model but one side is longer than the other, they might be for a U model the bid is $ 100.00, they have Vinnie's name on them.
  7. b61mack
    Which Power Service did you use, the silver bottle is for summer, the white and red bottle is for winter. at least that's what the PS guy out at the Iowa 80 truck show told me. I like Howes and Lucas to but don't know which one is better.
  8. b61mack
    Can you put a tack weld on the smooth side and heat the nut and unbolt it then grind the tack off.
  9. b61mack
    THANKS TO ALL THE VETS, Hope everyone has a safe and happy day.
  10. b61mack
    And don't forget the dumb ass traded 5 terrorist for 1 deserter.
  11. b61mack
    Mike ( Superdog ) has a couple R models forsale, but he is in Iowa.
  12. b61mack
    If you have the bulldog mounted on you might check the plate and bolts on the under side to see if there hitting the radiator.
  13. b61mack
    Obama is more like a dictator than a president, I is his way or no way.
  14. b61mack
    I used (The Right Stuff ) in the can I got from Carquest, it seems a little thicker. I made sure I used plenty so it squished out good all the way around.
  15. b61mack
    It might not be the serial #, I bought a cab and that's the only number on it that I thought would be it. that number is on the inspection sticker were it says (id# or vin#) it was a 17 digit # so I thought it might be it.
  16. b61mack
    Can someone run a vin# on a 96 R model # 473p11tk97mcc1617 and tell me the specs. i don't know if its a 688 or 690. and i am looking for the driver side seat base the one that the seat sits on that bolts to the floor, didn't know if all the R model cabs were the same or not. it is a bostrom talladaga 914 mid back seat. Thanks
  17. b61mack
    I installed 76 diffs and hubs in a 96 CH 613 housings, it was a 40,000# airride with 38,000# housings. on my B61 I got the whole frame and slid it over the B frame all the way under the cab so it wont be a noticeable. on east coast R and F and B models the frames are the same with, the CH frame will slide over them. I just bolted mine ten plus years hadn't had any trouble.
  18. b61mack
    Looks like the shears bent the fiftwheel, I would say it is 38s, it has steel caps on the bottom. not heavy enough for 44s.
  19. b61mack
    The good folks at Watts Mack has them new.
  20. b61mack
    Nice truck
  21. b61mack
    Looks like Jerry Ayers truck, I think it was at Macungie,
  22. b61mack
    Nice shot, what kind of dash cam do you have. looks like it does a good job.
  23. b61mack
    would you notice a difference in the ride running empty between 44s and 58s.
  24. b61mack
    IF it was road worthy I could bring it to Macungie next year for someone that buys it.
  25. b61mack
    Yes it is a F-600, that truck is sweet, looks like original paint too.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...