Jump to content

MACKS

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    1,681

  • Joined

  • Last visited

 Content Type 

Everything posted by MACKS

  1. MACKS
    6,000 for a turbo,holy crap what the hell is it made off?
  2. MACKS
    That would be nice but I dont think there's enough room,never had a filter on any of my other dumps and no problems,see how it goes,so if any one has a similar problem you know where to look first.
  3. MACKS
    No filter,my fuel tank was converted to a hyd tank when i added a drop axle,thats where that piece of aluminum came from,I took the tank off and flushed it out good added all new hyd fluid,400 bucks just for the hyd fluid,nothing is cheap any more..lol
  4. MACKS
    Do they sweep it up and re use it?
  5. MACKS
    Gave it one more shot and pulled out the entire relief valve cartridge witch I didn't do before and found the problem,a little piece of metal stuck in there,back up and working perfectly. . Sent from my SM-G900V using Tapatalk
  6. MACKS
    Drained it out and dropped the pump,took out the selector valve and clean it and inside and also the pressure valve blew everything out with compressed air and also clean out hyd tank and re installed with new hyd fluid,same problem,so tomorrow I'll get a new pump and be done with it..
  7. MACKS
    exactly my thought but where and how do i get to it to clean it,if i wasn't hauling asphalt i could let it go.
  8. MACKS
    Its a telescopic,let it down and tried to stop it but it just slows it down,it comes down normal if i put it in hold or up position it just comes down slowly.
  9. MACKS
    Im sure its not the piston and the valve is closing all the way,i went under and taped it in the make sure,could there be something wrong with it like o ring or something,seems like its just not shuting of the flow.
  10. MACKS
    Its a side mount pto and Munchi hyd pump mounted to a Mack 12 speed.problem is all of sudden the body wont stay up loaded or empty,goes up fine but then slowly come right back down,the directional valve is moving freely back and forth when i move the lever,its air operated,thinking theres dirt or something stuck some where,but where,can i take something apart and clean it or should i take the pump off and bring it somewhere to be fixed,got to get back up asap,thanks for any help
  11. MACKS
    Sounds to easy..lol,congrats.
  12. MACKS
    Yup,i just cleaned my evaporator for the first time on my 96 cl,what a difference.vent temps are now 44-45,also make sure the gasket in the cover is good or you wont pull the air across the evaporator
  13. MACKS
    I will check with mack thanks for the info.
  14. MACKS
    I just cleaned the evaporator on my 96 cl,the one side was caked over with hardened dirt but there are no filters on my truck,should there be?AC works 100 times better now.
  15. MACKS
    Well it rides awesome on a smooth road but they are few and far between here on long Island,lol guess were not paying enough taxes for nice smooth roads..
  16. MACKS
    Yup,apparently the factory gasket doesn't have the removable strip in it so the whole gasket has to come out,I don't know how the heck they got it back in lol
  17. MACKS
    Thanks for the info,are the Granites dump trucks and they are axle forward right,the cl with axle back probably has more bounce than the forward i would think
  18. MACKS
    Thanks Milkman you should know the deal having both,looking to get rid of the bounce like when you hit a dip in the road and front end feels like it wants to launch into outer space,lol
  19. MACKS
    I was thinking about doing this myself, thank god I didn't, it took three experienced guys over an hour and a half to do both windshields.
  20. MACKS
    Still have the original front springs on my cl 20,000 multi leaf,when i do have new springs installed should I go with the same or would the tapered springs give me a better ride?
  21. MACKS
    Ive seen some pretty tall spacers on those three leaf springs,I would check with a spring shop they will know and you can buy the spacer and u bolts from them.
  22. MACKS
    Gods country,absolutely beautiful.
  23. MACKS
    I have 58 rears in my dump truck,I guess that will stop them before they kiss the tailgate!!
  24. MACKS
    you have to get your truck inspected twice a year?
  25. MACKS
    Just a side note,my buddy just got a ticket from the dec for dripping oil out of the breather tube onto the road,just a few drops,cost him a morning in court and 150 bucks..

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...